Name - Allied Telesis AT-8000S Cli Reference Manual

Allied Telesyn AT-8000S Switch
CLI Reference Guide
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
Commands under the interface range context are executed independently on each interface in the range. If the
command returns an error on one of the interfaces, an error message is displayed and execution of the command
continues on the other interfaces.
Example
The following example groups VLANs 221, 228 and 889 to receive the same command.
Console(config)# interface range vlan 221-228,889
Console(config-if)#

name

The name Interface Configuration mode command adds a name to a VLAN. To remove the VLAN name, use the
no form of this command.
Syntax
name string
no name
Parameters
•
string — Unique name to be associated with this VLAN. (Range: 1-32 characters)
Default Configuration
No name is defined.
Command Mode
Interface Configuration (VLAN) mode. Cannot be configured for a range of interfaces (range context).
User Guidelines
There are no user guidelines for this command.
Example
The following example gives VLAN number 19 the name Marketing.
Console(config)# interface vlan 19
Console(config-if)# name Marketing
Page 258