Spanning-Tree Bpdu - Allied Telesis AT-8000S Cli Reference Manual

Parameters
•
long — Specifies port path costs with a range of 1-200,000,000 .
•
short — Specifies port path costs with a range of 0-65,535.
Default Configuration
Short path cost method.
Command Mode
Global Configuration mode
User Guidelines
This command applies to all spanning tree instances on the device.
The cost is set using the spanning-tree cost command.
Example
The following example sets the default path cost method to long.
Console(config)# spanning-tree pathcost method long

spanning-tree bpdu

The spanning-tree bpdu Global Configuration mode command defines BPDU handling when the spanning tree is
disabled globally or on a single interface. To return to the default configuration, use the no form of this command.
Syntax
spanning-tree bpdu {filtering | flooding}
Parameters
•
filtering — Filter BPDU packets when the spanning tree is disabled on an interface.
•
flooding — Flood BPDU packets when the spanning tree is disabled on an interface.
Default Configuration
The default setting is flooding.
Command Modes
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example defines BPDU packet flooding when the spanning-tree is disabled on an interface
Console(config)# spanning-tree bpdu flooding
Page 189
Spanning-Tree Commands
.