Port Monitor Vlan-Tagging; Show Ports Monitor - Allied Telesis AT-8000S Cli Reference Manual

port monitor vlan-tagging

The port monitor Interface Configuration (Ethernet) mode command transmits tagged ingress mirrored packets.
To transmit untagged ingress mirrored packets, use the no form of this command.
Syntax
port monitor vlan-tagging
no port monitor vlan-tagging
Default Configuration
Ingress mirrored packets are transmitted untagged.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures all ingress mirrored packets from port 1/e9 to be transmitted as tagged packets.
Console (config)# interface ethernet 1/e9
Console (config-if)# port monitor vlan-tagging

show ports monitor

The show ports monitor User EXEC mode command displays the port monitoring status.
Syntax
show ports monitor
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example shows how the port monitoring status is displayed.
Console> show ports monitor
Source Port Destination Port Type Status
Page 127
Port Monitor Commands
VLAN Tagging