Chapter 10.Line Commands; Line; Speed - Allied Telesis AT-8000S Cli Reference Manual

Allied Telesyn AT-8000S Switch
CLI Reference Guide

Chapter 10.Line Commands

line

The line Global Configuration mode command identifies a specific line for configuration and enters the Line
Configuration command mode.
Syntax
line {console | telnet | ssh}
Parameters
•
console — Console terminal line.
•
telnet — Virtual terminal for remote console access (Telnet).
•
ssh — Virtual terminal for secured remote console access (SSH).
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example configures the device as a virtual terminal for remote console access.
Console(config)# line telnet
Console(config-line)#

speed

The speed Line Configuration mode command sets the line baud rate. To return to the default configuration, use
the no form of the command.
Syntax
speed bps
no speed
Parameters
•
bps—Baud rate in bits per second (bps). Possible values are 2400, 9600, 19200, 38400, 57600 and 115200.
Page 106