Table of Contents
Advertisement
IPC6512-Z30&6522-Z30
User Guide
l Sound Intensity Threshold: Range [1-100], it can filter the sound in the environment, the
Step 4 Click
same as the setting of the arming schedule for motion detection. Refer to
Schedule for Motion Detection
Step 5 Check the checkbox to select the linkage method taken for audio exception. Notify surveillance
center, send email, trigger alarm output, etc. are selectable. Please refer to
Actions for Motion Detection
Step 6 Click
----End
8.7.5 Configuring Alarm Input
Step 1 Enter the Alarm Input Settings interface: Configuration > Advanced Configuration> Events
> Alarm Input.
Step 2 Choose the alarm input No. and the Alarm Type. The alarm type can be NO (Normally Open)
and NC (Normally Closed).
Step 3 Edit the name in
name for the alarm input (optional).
Figure 8-47 Alarm Input Settings
Issue 02 (2014-12-25)
louder the environment sound, the higher the value should be. You can adjust it according
to the actual environment.
to edit the arming schedule. The arming schedule configuration is the
to save the settings.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
in
8.7.1 Configuring Motion
in
8.7.1 Configuring Motion
8 Speed Dome Configuration
Task 2: Set the Arming
Detection.
Task 3: Set the Alarm
Detection.
to set a
73
Advertisement
Table of Contents
