3-2: Midi 2 - Korg TRITON Extreme Manual

3–2: MIDI 2
(MIDI Filter –2)
2–1a
3–2a
3–2a: Enable JS X as AMS, Enable JS+Y,
Enable JS–Y, Enable Ribbon
Enable JS X as AMS
Specifies whether or not MIDI pitch bend messages (the X
axis of the TRITON Extreme's joystick) will be received to
control the AMS ("Alternate Modulation Source (AMS)"
☞p.271) effect assigned to JS X. (This is not a filter for MIDI
pitch bend message reception.)
Enable JS+Y
Specifies whether or not MIDI control change CC#1 (the +Y
axis of the TRITON Extreme's joystick, or specified as the
"B" assignment of a realtime control knob) will be transmit-
ted or received.
Enable JS–Y
Specifies whether or not MIDI control change CC#2 (the –Y
axis of the TRITON Extreme's joystick, or specified as the
"B" assignment of a realtime control knob) will be transmit-
ted or received.
Enable Ribbon
Specifies whether or not MIDI control change CC#16 (the
TRITON Extreme's ribbon controller, or specified as the "B"
assignment of a realtime control knob) will be transmitted or
received.
3–3: MIDI 3
(MIDI Filter –3)
Specifies whether or not the effects of A and B modes for the
REALTIME CONTROL knobs [1], [2], [3] and [4] will be
transmitted and received. In A-mode, the MIDI control mes-
sage for each knob is fixed. In B-mode, the message for each
knob can be assigned in Controller page.
2–1a
3–3a
46
3–3a: Enable Realtime Control Knob –1...4
Enable Realtime Control Knob –1
0–1
Specifies whether or not the A-mode MIDI control message
CC#74 (the TRITON Extreme's low pass filter cutoff fre-
quency) and the B-mode MIDI control message assigned to
knob [1] will be transmitted and received.
Enable Realtime Control Knob –2
Specifies whether or not the A-mode MIDI control message
CC#71 (the TRITON Extreme's low pass filter resonance or
high pass filter cutoff frequency) and the B-mode MIDI con-
trol message assigned to knob [2] will be transmitted and
received.
Enable Realtime Control Knob –3
Specifies whether or not the A-mode MIDI control message
CC#79 (the TRITON Extreme's filter EG intensity) and the B-
[Off, On]
mode MIDI control message assigned to knob [3] will be
transmitted and received.
Enable Realtime Control Knob –4
Specifies whether or not the A-mode MIDI control message
CC#72 (the EG release time for the TRITON Extreme's filter
and amplifier) and the B-mode MIDI control message
[Off, On]
assigned to knob [4] will be transmitted and received.
3–4: MIDI 4
[Off, On]
2–1a
3–4a
[Off, On]
3–4a: Enable SW1, Enable SW2, Enable Other
Control Change
Enable SW1, Enable SW2
Specifies whether or not the effect of the [SW1] and [SW2]
keys will be transmitted and received.
The function of these keys is specified in the P4: Edit-Zone/
Ctrl. Controller page.
This filter setting is valid for settings of SW1 Mod.: CC#80,
0–1
SW2 Mod.: CC#81, or Porta.SW: CC#65.
Enable Foot Pedal/Switch
Specifies whether or not the effect of the ASSIGNABLE
PEDAL/SWITCH will be transmitted and received. The
function is assigned in Global P2: Controller page.
This filter setting is valid when a MIDI control change is
assigned.
Enable Other Control Change
Specifies whether or not MIDI control messages not covered
in the preceding items MIDI Filter 1–4 will be transmitted
and received.
(MIDI Filter –4)
[Off, On]
[Off, On]
[Off, On]
[Off, On]
0–1
[Off, On]
[Off, On]
[Off, On]