St. Ring Modulator (Stereo Ring Modulator) - Korg TRITON Extreme Manual

Tremolo Shape
g
Sets the degree of the tremolo LFO shaping
Tremolo Depth
Sets the tremolo modulation depth
Src
h
Selects the modulation source for the tremolo modulation depth
Amt
Sets the modulation amount of the tremolo modulation depth
Wet/Dry
Sets the balance between the effect and dry sounds
Src
i
Selects the modulation source of the effect balance
Amt
Sets the modulation amount of the effect balance
a: Type, a: LFO Phase [degree]
Select the type of phaser LFO and tremolo LFO for the "Type"
parameter. How the effect sound moves or rotates depends on the
type of LFO. Selecting "LFO Phase" enables you to offset the tim-
ing of the phaser peak and control a subtle movement and rota-
tion of the sound.
f: Phaser WetDry, i: Wet/Dry
The "Phaser Wet/Dry" parameter sets the balance between the
phaser output and the dry sound. The "Wet/Dry" parameter sets
the balance between the final phaser and tremolo output level and
the dry sound.
036: St. Ring Modulator
(Stereo Ring Modulator)
This effect creates a metallic sound by applying the oscillators
to the input signal. Use the LFO or Dynamic Modulation to
modulate the oscillator to create a radical modulation. Match-
ing the oscillator frequency with a note number will produce
a ring modulation effect in specific key ranges.
Stereo In - Stereo Out
Left
Pre LPF
Pre LPF
Right
Sine Oscillator
Fixed
Fixed Frequency
OSC Mode
Note Offset, Fine
Note No.
Note (Key Follow)
LFO
Pre LPF
a Sets the damping amount of the high range input to the ring modula-
tor
OSC Mode
b Switching between specifying the oscillator frequency and using a
note number
Fixed Frequency [Hz]
Sets the oscillator frequency when OSC Mode is set to Fixed
Src
c Selects the modulation source for the oscillator frequency when OSC
Mode is set to Fixed
Amt
Sets the modulation amount of the oscillator frequency when OSC
Mode is set to Fixed
Note Offset
Sets the pitch difference from the original note when OSC Mode is
set to Note (Key Follow)
d
Note Fine
Fine-adjusts the oscillator frequency
–100...+100
☞
Fx:020
0...100
Off...Tempo
–100...+100
Dry, 1:99...99:1, Wet
☞
,
Off...Tempo
–100...+100
Wet / Dry
Ring Modulator
Ring Modulator
Wet / Dry
Pitch
0...100
☞
Fixed, Note (Key Follow)
☞
0...12.00kHz
☞
,
Off...Tempo
–12.00...+12.00kHz
–48...+48
☞
–100...+100
☞
LFO Frequency [Hz]
Sets the LFO speed of the oscillator frequency modulation
e Src
Selects the modulation source of LFO speed
Amt
Sets the modulation amount of LFO speed
BPM/MIDI Sync
Switches between using the frequency of the LFO speed and using
the tempo and notes
BPM
Selects MIDI Clock and assigns tempo
f
Base Note
Selects the type of notes that specify the LFO speed
Times
Sets the number of notes that specify the LFO speed
LFO Depth
Sets the depth of LFO modulation for the oscillator frequency
g Src
Selects the modulation source of the depth of modulation
Amt
Sets the modulation amount of the depth of modulation
Wet/Dry
Sets the balance between the effect and dry sounds
Src
h
Selects the modulation source of the effect balance
Amt
Sets the modulation amount of the effect balance
a: Pre LPF
This parameter enables you to set the damping amount of the
high range sound input to the ring modulator. If the input sound
contains lots of harmonics, the effect may sound dirty. In this case,
cut a certain amount of high range.
b: OSC Mode
This parameter determines whether or not the oscillator fre-
quency follows the note number.
c: Fixed Frequency [Hz]
This parameter sets the oscillator frequency when "OSC Mode" is
set to Fixed.
d: Note Offset, d: Note Fine
These parameters for the oscillator are used when "OSC Mode" is
set to Note (Key Follow). The "Note Offset" sets the pitch differ-
ence from the original note in semitone steps. The "Note Fine"
parameter fine-adjusts the pitch in cent steps. Matching the oscil-
lator frequency with the note number produces a ring modulation
effect in the correct key.
0.02...20.00Hz
☞
Fx:009,
Off...Tempo
–20.00...+20.00Hz
Off, On
☞
Fx:009,
MIDI, 40...240
☞
Fx:009
☞
Fx:009
x1...x16
☞
Fx:009
0...100
Off...Tempo
–100...+100
Dry, 1:99...99:1, Wet
Off...Tempo
–100...+100
237