Triton Extreme Operations When Control Changes Are; Transmitted/Received - Korg TRITON Extreme Manual

TRITON Extreme operations when con-
trol changes are transmitted/received
CC# Control
0 Bank select (MSB)
1 Modulation 1
2 Modulation 2
4 Foot controller
5 Portamento time
6 Data entry (MSB)
7 Volume
8 Post insertion effect panpot
10 Panpot
11 Expression
12 Effect control 1
13 Effect control 2
16 Ribbon controller
17 Knob modulation 1
18 Controller (CC#18)
19 Knob modulation 2
20 Knob modulation 3
21 Knob modulation 4
32 Bank select (LSB)
38 Data entry (LSB)
64 Damper
65 Portamento On/Off
66 Sostenuto On/Off
67 Soft
70 Sustain level
71 Filter resonance level
High pass filter cutoff frequency
72 Release time
73 Attack time
74 Low pass filter cutoff frequency
75 Decay time
76 LFO1 speed
77 LFO1 depth
78 LFO1 delay
79 Filter EG intensity
80 Panel switch 1 On/Off
81 Panel switch 2 On/Off
82 Foot switch On/Off
83 Controller (CC#83)
91 Effect 1 depth
92 Effect 2 depth
93 Effect 3 depth
94 Effect 4 depth
95 Effect 5 depth
96 Data increment
97 Data decrement
98 NRPN(LSB)
99 NRPN(MSB)
100 RPN(LSB)
101 RPN(MSB)
Any control change number (CC#00–95) can be
assigned as the B-mode function of a REALTIME CON-
TROLS knob. In this case, the transmitted values will all
be 0–127.
The following table shows the operations that the TRITON
Extreme will perform when control change messages are
received, and the relation between settings and controller
movements on the TRITON Extreme
Value Function
0...127 Bank select message MSB
0...127 Corresponds to joystick movement in the +Y direction (Vertical upward)
0...127 Corresponds to joystick movement in the –Y direction (Vertical down-
ward)
0...127 Corresponds to when the assignable pedal function is set to Foot Pedal
0...127 Portamento time
0...127 MSB of RPN and NRPN data
0...127 Volume
0...127 Pan after the insertion effect
If Valve Force is On and "Placement" is set to Insert, this controls the
panning of the output from Valve Force.
0...127 Pan
0...127 Volume
0...127 Corresponds to effect dynamic control source FXCtrl1
0...127 Corresponds to effect dynamic control source FXCtrl2
0...127 Corresponds to ribbon controller operation
0...127 Corresponds to when Knob Mod.1 is assigned as the B-mode function of a
REALTIME CONTROLS knob
0...127 For control of Alternate Modulation or Effect Dynamic Modulation
0...127 Corresponds to when Knob Mod.2 is assigned as the B-mode function of a
REALTIME CONTROLS knob
0...127 Corresponds to when Knob Mod.3 is assigned as the B-mode function of a
REALTIME CONTROLS knob
0...127 Corresponds to when Knob Mod.4 is assigned as the B-mode function of a
REALTIME CONTROLS knob
0...127 LSB of bank select message
0...127 LSB of RPN or NRPN data
0...127 Damper effect
0...63(Off), 64...127(On) Turn the portamento effect on/off
0...63(Off), 64...127(On) Turn the sostenuto effect on/off
0...127 Soft pedal effect
0...127 Sustain levels of the filter EG and amp EG
0...127 Resonance level of the filter
0...127 Cutoff frequency of the high pass filter
0...127 Release times of the filter EG and amp EG
0...127 Attack times of the filter EG and amp EG
0...127 Cutoff frequency of the low pass filter
0...127 Decay times/slope times of the filter EG and amp EG
0...127 LFO1 speed
0...127 Pitch LFO1 intensity
0...127 LFO1 delay
0...127 Filter EG intensity
0...63(Off), 64...127(On) Corresponds to on/off when the SW1 function is set to SW1 Mod.
0...63(Off), 64...127(On) Corresponds to on/off when the SW2 function is set to SW2 Mod.
0...63(Off), 64...127(On) Corresponds to on/off when the function of the assignable foot switch is set to
Foot SW
0...127 For controlling Alternate Modulation or Effect Dynamic Modulation
0...127 Send 2 level
0(Off), 1...127(On) Turn insertion effect 1, 2, 3, 4, 5 on/off
0...127 Send 1 level
0(Off), 1...127(On) Master effect 1 on/off
0(Off), 1...127(On) Master effect 2 on/off
0
0
2 Corresponds to the arpeggiator on/off switch
10 Corresponds to the arpeggiator gate control knob
11 Corresponds to the arpeggiator Velocity control knob
16 Corresponds to the Valve Force ON/OFF switch
17 Corresponds to the Valve Force INPUT TRIM knob
18 Corresponds to the Valve Force ULTRA BOOST knob
19 Corresponds to the Valve Force TUBE GAIN knob
20 Corresponds to the Valve Force OUTPUT LEVEL knob
0 MSB of NRPN
0 Select the pitch bend range
1 Select Fine Tune
2 Select Coarse Tune
0 MSB of RPN
*1
*2
*3
*3
*8
*1
*2
*4
*5
*4
*4
*4
*4
*4
*4
*4
*4
*4
*6
*6
*6
*7
*7
*7
*7
*7
*7
*7
*7
*2
*2
*2
285