7-2: Scan Zone - Korg TRITON Extreme Manual

Swing
This parameter shifts the timing of the odd-numbered notes
of the arpeggio.
When Resolution =
Step 1
2 3 4 5
–50 –25
Swing
Sort*
This specifies the order in which the notes you press will be
arpeggiated.
On (checked): Notes will be arpeggiated in the order of their
pitch, regardless of the order in which you pressed them.
Off (unchecked): Notes will be arpeggiated in the order in
which you pressed them.
Latch*
Specifies whether or not the arpeggio will continue playing
after you take your hand off of the keyboard.
On (checked): The arpeggio will continue playing after you
remove your hand from the keyboard.
Off (unchecked): The arpeggio will stop when you remove
your hand from the keyboard.
Key Sync.*
Specifies whether the arpeggio pattern will begin when you
press a key, or whether it will always follow the " (Tempo)"
(0–1a).
On (checked): The arpeggio pattern will start playing from
the beginning when a note-on occurs from a condition
where no keys are pressed. This setting is suitable when you
are playing in realtime and want the arpeggio to play from
the beginning of the measure.
Off (unchecked): The arpeggio pattern will always play
according to the " (Tempo)."
Keyboard*
This specifies whether the notes you play on the keyboard
will be sounded as usual in addition to being sounded as
part of the arpeggio ("keyboard" 0–2a).
On (checked): The notes you play will be sounded on their
own, in addition to being sounded as part of the arpeggio.
For example if you simultaneously press two or more notes,
they will be sounded as usual in addition to being played as
arpeggiated notes.
Off (unchecked): Only the arpeggiated notes will be heard.
*: These parameters can also be set from "P0: Play,
Arpeggio."
[–100...+100(%)]
▼ 7–1: Page Menu Command
6 7 8 9
7–1A: Copy Arpeggiator
This command can be used to copy arpeggio settings from
another location to the current program.
+25 +50
1 Select "Copy Arpeggiator" to access the dialog box.
[Off, On]
2 In "From" specify the source of the arpeggio settings
3 If you are copying from Combination, Song, or Song Play
[Off, On]
4 To execute the Copy Arpeggio operation, press the OK
7–2: Scan Zone
[Off, On]
[Off, On]
7–2a: Zone Map
This shows the Scan Zone setting.
7–2b: Scan Zone
Top Key
Bottom Key
These parameters specify the range of notes (keys) for which
the arpeggiator will function. "Top Key" is the upper limit,
and "Bottom Key" is the lower limit.
Top Velocity
Bottom Velocity
Specifies the range of velocities for which the arpeggiator
will function. "Top Velocity" is the upper limit, and "Bottom
Velocity" is the lower limit.
(mode, bank, number) that you wish to copy.
mode, specify whether you wish to copy from A or B.
button. To cancel, press the Cancel button.
7–2a
7–2b
Note number and velocity can also be entered by hold-
ing down the [ENTER] key and playing a note on the
keyboard.
0–1A
7–1A
7–1
[C–1...G9]
[C–1...G9]
[001...127]
[001...127]
29