Foot Pedal Assign; Foot Pedal Assign List - Korg TRITON Extreme Manual

Foot Pedal Assign

You can assign the function that will be controlled by an
assignable pedal (Korg XVP-10 or EXP-2 option) connected
to the ASSIGNABLE PEDAL jack.
• This setting is made in Global P2: Controller "Foot Pedal
Assign" (2–1a).
If you select a function that includes a CC#, that MIDI
control change message will be transmitted each time
the switch is turned on/off. (Off: 0, On: 127)
If you select Knob1...4, the MIDI control change mes-
sage specified by the Knob1...4 B-Assign settings will be
transmitted each time the foot switch is turned on or
off. (Off: 0, On: 127)

Foot Pedal Assign List

Off
Master Volume
Foot Pedal (CC#04)
Portamento Time
(CC#05)
Volume (CC#07)
Post IFX Pan (CC#08)
Pan (CC#10)
Expression (CC#11)
FX Control 1 (CC#12)
FX Control 2 (CC#13)
MFX Send 1 (CC#93)
MFX Send 2 (CC#91)
JS+Y (CC#01)
JS–Y (CC#02)
Ribbon (CC#16)
Slider (CC#18)
Knob 1...4
282
The connected pedal will not function.
Control the volume. Simultaneously, the universal exclusive message Master Volume [F0H, 7FH, nn, 04, 01, vv, mm,
F7H] will be transmitted to control the volume of all timbres or tracks (while preserving the volume balance between tim-
bres or tracks).
Alternate Modulation or Effect Dynamic Modulation can be controlled. To control these, set "AMS" or "Dmod Src" to
Pedal:CC#04.
Control the speed at which portamento will change the pitch.
Control the volume of a Program, of a timbre in a Combination, or of a track in Sequencer/Song Play modes.
Control the pan after passing through the insertion effect.
If Valve Force is On and "Placement" is set to Insert, this controls the panning of the output from Valve Force.
Control the pan of a Program, of a timbre in a Combination, or of a track in Sequencer/Song Play modes.
Control the volume of a Program, of a timbre in a Combination, or of a track in Sequencer/Song Play modes. Expression
is multiplied with the Volume value to determine the actual volume level.
Control Effect Dynamic Modulation. To control this, set Dmod Src to FXCtrl1:#12.
Control Effect Dynamic Modulation. To control this, set Dmod Src to FXCtrl2:#13.
Control the send level to master effect 1 (MFX1) from a Program, a timbre in a Combination, or a track in Sequencer/
Song Play modes. Simultaneously, this will also control the send level to master effect 1 (MFX1) from after the insertion
effect of the matching MIDI channel.
Control the send level to master effect 2 (MFX2) from a Program, a timbre in a Combination, or a track in Sequencer/
Song Play modes. Simultaneously, this will also control the send level to master effect 2 (MFX2) from after the insertion
effect of the matching MIDI channel.
Pedal operation will control the effect produced by joystick movement in the +Y direction (Vertical upward).
Pedal operation will control the effect produced by joystick movement in the –Y direction (Vertical downward).
Pedal operation will control the effect of the ribbon controller.
Pedal operation will control the effect of the [VALUE] slider.
Pedal operation will control the effect of REALTIME CONTROLS knobs [1]–[4].