048: St. Auto Panning Dly(Stereo Auto Panning Delay); 049: L/C/R Bpm Delay - Korg TRITON Extreme Manual

a: Control Target
This parameter selects no level control, delay output control
(effect balance), or feedback amount control.
a: Polarity, b: Threshold, b: Offset, c: Attack, d: Release
The "Offset" parameter specifies the value for the "Control Tar-
get" parameter (that is set to None), expressed as the ratio relative
to the parameter value (the "Wet/Dry" value with "Control Tar-
get"=Out, or the "Feedback" value with "Control Target"=FB).
When "Polarity" is positive, the "Control Target" value is
obtained by multiplying the parameter value by the "Offset"
value (if the input level is below the threshold), or equals the
parameter value if the input level exceeds the threshold.
When "Polarity" is negative, Control Target value equals the
parameter value if the input level is below the threshold, or is
obtained by multiplying the parameter value by the "Offset"
value if the level exceeds the threshold.
The "Attack" and "Release" parameters specify attack time and
release time of delay level control.
Level
Dry
Envelope
Wet
Control Target=Out
Polarity= (–)
Wet
Control Target=Out
Polarity= (+)
048: St. Auto Panning Dly
(Stereo Auto Panning Delay)
This stereo delay effect pans the delay sound left and right
using the LFO.
Stereo In - Stereo Out
Left
Delay
Delay
Right
LFO: Tri / Sin LFO Shape
L Delay Time [msec]
Sets the delay time for the left channel
a
L Feedback
Sets the feedback amount for the left channel
R Delay Time [msec]
Sets the delay time for the right channel
b
R Feedback
Sets the feedback amount for the right channel
High Damp [%]
Sets the damping amount in the high range
c
Low Damp [%]
Sets the damping amount in the low range
LFO Waveform
Selects LFO Waveform
d
LFO Shape
Determines how much the LFO waveform is changed
LFO Phase [degree]
e
Sets the LFO phase difference between the left and right
244
Dynamic Delay
Threshold
Release
Attack
(Ducking Delay)
Delay Time
Time
High Damp Low Damp
Pan
Feedback Depth
Pan
High Damp Low Damp
LFO Phase
0.0...680.0msec
0.0...680.0msec
Panning Freq (Frequency) [Hz]
f
Sets the panning speed
Panning Depth
Sets the panning width
Src
g
Selects the modulation source for the panning width
Amt
Set the modulation amount of the panning width
Wet/Dry
Sets the balance between the effect and dry sounds
Src
h
Selects the modulation source of the effect balance
Amt
Sets the modulation amount of the effect balance

049: L/C/R BPM Delay

The L/C/R delay enables you to match the delay time with
the song tempo. You can also synchronize the delay time with
the arpeggiator or sequencer. If you program the tempo
before performance, you can achieve a delay effect that syn-
chronizes with the song in real-time. Delay time is set by
notes.
Wet: Mono In - Stereo Out / Dry: Stereo In -Stereo Out
Left
+
Right
Tempo
BPM
BPM
Selects MIDI Clock and assigns tempo
a
Time Over? >
Displays an error message when the delay time exceeds the upper
Wet / Dry limit
L Delay Base Note
Selects the type of notes to specify the delay time for TapL
b Times
Sets the number of notes to specify the delay time for TapL
Level
Wet / Dry
Sets the output level of TapL
C Delay Base Note
Selects the type of notes to specify the delay time for TapC
c Times
Sets the number of notes to specify the delay time for TapC
–100...+100 Level
Sets the output level of TapC
R Delay Base Note
Selects the type of notes to specify the delay time for TapR
–100...+100
d Times
Sets the number of notes to specify the delay time for TapR
0...100%
☞
Fx:043 Level
Sets the output level of TapR
0...100%
☞
Fx:043
Feedback (C Delay)
Sets the feedback amount of TapC
Triangle, Sine
Src
e
Selects the modulation source for the TapC feedback
–100...+100
☞
Fx:020
Amt
Sets the modulation amount of the TapC feedback
–180...+180
☞
Fx:034
L Delay
Input Level D-mod
Level
C Delay
High Damp Low Damp
Level
Feedback
R Delay
Input Level D-mod
Level
BPM
Base Note x Times
Base Note x Times
Base Note x Times
0.02...20.00Hz
0...100
Off...Tempo
–100...+100
Dry, 1:99...99:1, Wet
Off...Tempo
–100...+100
Wet / Dry
Spread
Wet / Dry
MIDI, 40...240
☞
,
----, OVER!!
☞
☞
,
x1...x16
☞
0...50
☞
,
x1...x16
☞
0...50
☞
,
x1...x16
☞
0...50
–100...+100
Off...Tempo
–100...+100