Handset Display Screen Messages; Screen Display Messages - AT&T BL102-4S Complete User's Manual

Appendix

Handset display screen messages

Screen display messages

Blocked call
Calling HS X
(For models with two or
more handsets only)
Ended
HS X is calling
(For models with two or
more handsets only)
Intercom
INT to HS X
(For models with two or
more devices only)
Line in use
List empty
Low battery
Microphone on
Muted
New voicemail
No battery
No line
No message
Not available
Number repeated
Out of range or
no pwr at base
** Paging **
An incoming call is blocked.
The handset is calling another handset (for intercom calls).
You have just ended a call.
Another handset is calling.
The handset is on an intercom call.
You have started the intercom process, and need to enter the
number of the device you wish to call.
An extension telephone on the same line or one of the handsets is
in use.
There are no directory entries or call block list entries.
The battery needs to be charged.
Mute is off so the other party can hear your voice.
The microphone is off.
There are new voicemail messages from your telephone
service provider.
The handset in the telephone base or charger does not have a
battery properly installed.
There is no telephone line connected.
There are no messages in the answering system.
Someone else is already using the directory, caller ID log or
answering system.
The telephone number you have entered is already stored in the
directory.
The handset has lost communication with the telephone base.
The telephone base is paging all handsets.
90