Table of Contents
Advertisement
Answering system
Base message counter displays
Message window displays
No messages.
0
You need to set the clock (page 30).
0 (flashing)
Show for two seconds while adjusting the telephone
0-6
base speaker base
Total number of old messages and memos, or
1-99
message number currently playing during old message
playback.
Total number of messages and memos. The number
1-99 (flashing)
flashes when there are new (unreviewed) messages.
After a power failure, the number in the message
counter flashes to indicate that you need to set the
clock.
Memory is full. You must delete some messages
1-99 & F
before recording new messages.
(alternating)
The system is answering a call on the telephone base,
- -
or someone is trying to reach it remotely. The system
is in program mode.
NOTE: When the memory is full, the answering system answers incoming calls after 10
rings and announces, "Memory is full. Enter the remote access code."
69
Answering system
Remote access
You can access the answering system remotely by dialing your home
telephone number from any touch-tone telephone.
To remotely access the answering system
1.
Dial your telephone number from any touch-tone telephone.
2.
When the system plays your announcement, enter the two-digit remote
access code (19 is the default code, see page 37 to change it).
3.
You can also enter the remote commands (see Remote commands on this
page).
4.
Hang up to end the call and save all undeleted messages.
Remote commands
1
Press to listen to all messages.
2
Press to listen to new messages only.
3
Press to delete the current message (during playback).
33
Press twice to delete all old messages.
4
Press to repeat the current message (during playback).
44
Press twice to listen to the previous message.
5
Press to stop any operation (including recording).
*5
Press to listen to a list of remote commands.
6
Press to skip to the next message (during playback).
*7
Press to record a new announcement.
8
Press to end remote access (the call is terminated).
0
Press to turn the answering system on or off.
NOTES:
•
If you do not press any keys after you enter the remote access code, all new messages
play. If there are no new messages, all old messages play.
•
Once the new messages have played, the telephone announces the help menu options.
If you do not press any key within 20 seconds, the remote access call automatically
disconnects.
•
When the answering system is turned off, the telephone answers after 10 rings, and
announces, " Please enter your remote access code."
•
When the memory is full, the answering system answers incoming calls after 10 rings and
announces, " Memory is full. Enter the remote access code."
70
Advertisement
Table of Contents
