Call Block - AT&T EL52246 Quick Start Manual

Call block

If you have subscribed to caller ID service, you can use the call block feature to reject
certain calls automatically. The call block list stores up to 20 entries. The telephone
system can reject calls automatically according to:
• Numbers saved into the call block list
• Incoming calls without numbers
This feature is only available on the cordless handset.
Add a call block entry
Press MENU/
1.
SELECT
2. Press CID or
/SELECT again to choose Block list.
3. Press
MENU
CID or
4. Press
When the screen displays Enter number, use the dialing keys to enter a number
5.
(up to 30 digits).
CID or
• Press
• Press and hold
/DELETE to erase a digit.
• Press
MUTE
• Press and hold
-OR-
Copy a number from the redial list by pressing REDIAL/
CID or DIR or REDIAL/
/SELECT to copy the number.
MENU
6. Press /SELECT to move on to the name.
MENU
7. When the screen displays Enter name, use the dialing keys to enter a name (up to
15 characters). Press a key repeatedly until the desired character appears.
• Press CID or
Press 0 to add a space.
•
/DELETE to erase a character.
• Press
MUTE
• Press and hold
8. Press /SELECT to store your call block entry.
MENU
when the handset is idle.
DIR to scroll to Call block, then press
DIR to scroll to Add new entry, then press
DIR to move the cursor to the left or right.
/PAUSE to enter a 3-second dialing pause (a P appears).
REDIAL
/DELETE to erase all digits.
MUTE
repeatedly to find the desired number. Press
PAUSE
DIR to move the cursor to the left or right.
/DELETE to erase all characters.
MUTE
MENU
PAUSE
20
/SELECT.
/SELECT.
MENU
. Then, press