Voice Language; Dial Mode; Temporary Tone Dialing; Set Speed Dial Voicemail Number - AT&T EL52103 Quick Start Manual

Initial basic settings

Voice language

Note: This feature is available in Canada version only.
The voice prompt language is preset to English. You can select English or French to
be used for all voice prompts.
1. -> or -> Settings -> SELECT.
2. or -> Voice language -> SELECT.
3. or to choose English or Français-> SELECT.

Dial mode

The dial mode is preset to touch-tone dialing. If you have pulse (rotary) service, you
need to change the dial mode to pulse dialing before using the telephone to make
a call.
1. MENU -> -> Settings -> SELECT.
or
2. or -> Dial mode -> SELECT.
3. or to choose Touch-tone or Pulse -> SELECT.

Temporary tone dialing

If you have pulse (rotary) service only, you can switch from pulse to touch-tone
dialing temporarily during a call. This is useful if you need to send touch-tone signals
to access your telephone banking or long distance services.
1. During a call, press TONE .
2. Use the dialing keys to enter the number. The telephone sends touch-tone
signals. The telephone automatically returns to pulse dialing mode after you end
the call.

Set speed dial voicemail number

If you subscribe to a voicemail service offered by your telephone service provider,
you can save the voicemail number to
you want to retrieve voicemail messages, press and hold 1.
1. MENU -> or -> Settings -> SELECT.
2. or -> Voicemail # -> SELECT.
3. Enter the voicemail number (up to 30 digits) -> SELECT to save.
Note: Contact your telephone service provider for more information and assistance about your
voicemail service.
1
on each handset for easy access. When
14

Operate

Operation
Making a call
Press PHONE/FLASH
Enter the telephone number.
Enter the telephone number ->
On-hook dialing
Press PHONE/FLASH
(predialing)
Answering a
PHONE/FLASH
Press
call
dialing keys (0-9, TONE or #).
Ending a call
Press OFF/CANCEL or return the handset to the
telephone base or charger.
Handset
During a call, press
speakerphone
handsfree speakerphone and normal handset use.
Press REDIAL repeatedly to select the desired entry ->
Redial
PHONE/FLASH
Using a cordless handset:
Volume control
Press /VOLUME to decrease or press
q CID
increase the listening volume during a call.
Using the telephone base:
Press q/VOLUME - to decrease or press p/VOLUME + to
increase the listening volume.
Call waiting
PHONE/FLASH to put current call on hold and to
Press
f
(Requires
take the new call.
subscription
Press PHONE/FLASH at any time to switch back and
f
from telephone)
forth between calls.
When a handset is already on a call, press
Join a call in
f
PHONE/FLASH or
progress
to join the call.
(Use up to two
OFF/CANCEL or place the handset in the
Press
system handsets
f
telephone base or handset charger to exit the call. The call
at a time on an
continues until all handsets hang up.
outside call.)
Press INT when the handset is not in use.
Intercom
f
If you have two handsets only, the destination handset
(Use for
f
rings.
conversations
If you have more than two handsets or devices, use
between two
f
the dialing keys to enter the handset number (1-5). The
handsets.)
destination handset rings.
To answer the intercom call, press
f
/SPEAKER
on the destination handset.
To end the intercom call, press
f
the handset back in the telephone base or charger.
Steps
/SPEAKER
or ->
/SPEAKER
or to call.
/SPEAKER
or , or press any
/SPEAKER
to switch between
/SPEAKER
or to call.
/VOLUME to
p DIR
/SPEAKER
on another handset
PHONE/FLASH,
INT
or any dialing keys (0-9, TONE or #)
,
OFF/CANCEL or place
15