Push-To-Talk (Ptt); Turn Ptt On Or Off - AT&T TL87203 User Manual

Multiple handset use

Push-to-talk (PTT)

You can directly broadcast messages from one
handset or telephone base to the speakerphone of
one or a group of other devices. Press and hold
PUSH TO TALK on a handset or PTT on the telephone
base to begin a two-way communication.
Only one device can talk at a time. While talking to
X
another device, press and hold PUSH TO TALK on
the handset or PTT on the telephone base.
You must release PUSH TO TALK on the handset or PTT on the telephone
X
base, so the other person can respond.
Only one PTT session can be active at a time.
X
While PTT is in use between two devices, other devices cannot use the
X
intercom feature but can access the answering system.
When you attempt to place a PTT call to another device which is accessing
X
the answering system or on an intercom call or outside call, your device
screen shows Not available at this time.
NOTE: The PTT function is not available when QUIET mode is on.

Turn PTT on or off

Using a cordless handset:
Press PUSH TO TALK when the handset is not in use. The
1.
PUSH TO TALK menu displays.
2. Press CID or DIR to highlight PTT On/Off, and then
SELECT
press
3. Press CID or DIR to choose On or Off, and then
press SELECT
Using the telephone base:
Press PTT when the telephone base is not in use. The
1.
PUSH TO TALK menu displays.
2. Press CID, DIR, /RECORD, or /DELETE to
highlight PTT On/Off, and then press
3. Press CID, DIR, /RECORD, or /DELETE to
choose On or Off, and then press
NOTE: The handset or the telephone base screen displays PTT
when PTT is turned off.
.
.
SELECT
.
SELECT
.
/
96
PUSH TO TALK
BASE
PTT On/Off
BACK SELECT
INCOMING PTT
On
Off
BACK
SELECT
PUSH TO TALK
HANDSET
PTT On/Off
p
SELECT
BACK
q
INCOMING PTT
On
Off
p
SELECT
BACK
BACK SELECT
q
1