Caller Id Announce - AT&T BL102-1S Quick Start Manual

Directory
The directory can store up to 50 entries, which are shared by all system devices.
Operation
Adding an entry in
the directory
Searching/dialing an
entry
Caller ID
This product supports caller ID services offered by most telephone service
providers. The telephone stores caller ID information of the last 50 incoming calls in
the telephone base. This information is common to all devices.

Caller ID announce

When this feature is on and you have an incoming call, the handset and/or base speaks
"Call from..." and the name of the caller based on the directory or caller ID information. If
the caller's name is private or unknown, the phone number up to the last 11 digits will be
spoken. If the caller's phone number is also private or unknown, no information will be
spoken.
Using a cordless handset:
MENU
1. -> /
2. / to choose On or Off -> SELECT.
Review and dial a number in the call log
1. Press CID on the handset or telephone base in idle mode ->
through the list.
PHONE/FLASH or
2. Press
Erase missed calls indicator in the call log
When the screen shows XX Missed calls, scroll the call log one by one, or press and
OFF/CANCEL on the handset in idle mode.
hold
1. MENU ->
2. SELECT
3. Enter a telephone number up to 30 digits ->
4. Enter a name up to 15 characters ->
p
1. Press
select the desired directory.
2. Press
-> Caller ID annc -> SELECT.
/SPEAKER
Steps
/ -> Directory -> SELECT.
to select Add new entry.
DIR on the handset in idle mode ->
PHONE/FLASH or
on the handset to dial.
13
SELECT
.
SELECT
/SPEAKER to call.
/ to scroll
.
/ to