19.1.5
Hibernate like Soft Off
In order to also reduce the energy consumption in hibernate mode (S4), the system will instead be brought into Low Power Soft Off or Zero
Watt mode (S5) when it is switched off. However, the energy consumption will only reduce if Low Power Soft Off or Zero Watt mode is enabled.
Disabled
The system will be brought into hibernate mode (S4).
Instead of going into hibernate mode (S4), the system will be brought into Low Power Soft Off or Zero Watt mode (S5).
Enabled
19.1.6
USB At Power Off
Enables/disables the power supply for the USB ports. This option is only available if Low Power Soft Off and Zero Watt mode are disabled.
Always off
The USB ports are no longer supplied with power after the system is shut down.
Always on
The USB ports continue to be supplied with power after the system is shut down.
19.2
Wake-Up Resources
This submenu is only available if neither Zero-Watt mode nor Low Power Soft Off is enabled.
19.2.1
LAN
Determines whether the system can be switched on via a LAN controller (on the system board or expansion card).
Enabled
The system can be switched on via a LAN controller.
Disabled
The system cannot be switched on via a LAN controller.
Copyright © 2014 congatec AG
IGX1m02
99/134
Need help?
Do you have a question about the conga-IGX and is the answer not in the manual?
Questions and answers