Usb Port Control; Usb Device Control; System Monitoring; Controller Revision - Congatec conga-IGX User Manual

17.6.1

USB Port Control

Configures the use of the USB ports. Disabled USB ports are only available during the POST, but are no longer available under the
operating system.
Enable all ports
Enable front and internal ports
Enable rear and internal ports
Enable internal ports only
17.6.2

USB Device Control

For the Enable front and internal ports, Enable rear and internal ports and Enable used ports settings, which were made under USB Port Control,
there are additional options available here.
Enable all devices
Enable Keyboard and Mouse only
Control.
Enable all devices except mass storage devices/Hubs
17.7

System Monitoring

17.7.1

Controller Revision

Shows the version of the system monitoring controller.
17.7.2

Firmware Version

Shows the firmware version of the system monitoring controller.
Copyright © 2014 congatec AG
All USB ports are enabled.
All USB ports on the rear of the device are disabled.
All USB ports on the front of the device are disabled.
All external USB ports are disabled.
Those settings made under USB Port Control will be used without any limitation.
Only USB keyboards and USB mice can be operated at the USB ports enabled under USB Port
Any ports to which no USB keyboards or USB mice are connected are disabled. Keyboards with an
integrated hub result in deactivation of the port.
USB ports on which USB storage devices or USB hubs are connected will be
disabled.
IGX1m02 80/134