Tpm (Trusted Platform Module) Computing; Tpm Support; Tpm State; Pending Tpm Operation - Congatec conga-IGX User Manual

17.1

TPM (Trusted Platform Module) Computing

Opens the submenu for enabling TPM and changing the TPM settings. If this setup menu is available, the system board contains a security
and encryption chip (TPM - Trusted Platform Module) which complies with TCG specification 1.2. This chip allows security-related data
(passwords, etc.) to be stored securely. The use of TPM is standardized and is specified by the Trusted Computing Group (TCG).
17.1.1

TPM Support

Specifies whether the TPM (Trusted Platform Module) hardware is available. If the TPM is disabled, the system behaves like any other
system without TPM hardware.
Disabled
Enabled
17.1.2

TPM State

Specifies whether TPM (Trusted Platform Module) can be used by the operating system.
Disabled
Enabled
17.1.3

Pending TPM operation

Specifies a TPM operation which will be performed during the next boot process.
None
Enable Take Ownership
Disable Take Ownership The operating system cannot assume ownership of the
TPM Clear
Copyright © 2014 congatec AG
Trusted Platform Module is not available.
Trusted Platform Module is available.
Trusted Platform Module cannot be used.
Trusted Platform Module can be used.
No TPM operation will be performed.
The operating system can assume ownership of the TPM.
TPM is reset to the factory setting. All keys in the TPM will be deleted.
TPM.
IGX1m02 73/134