Power On Source; Low Power Soft Off; Power Failure Recovery - Congatec conga-IGX User Manual

19.1.2

Power On Source

Specifies whether the switch-on sources for the system are managed via BIOS or via an ACPI operating system.
BIOS Controlled
ACPI Controlled
19.1.3

Low Power Soft Off

Reduces the energy consumption of a system that is switched off.
When Low Power Soft Off is enabled, the system can only be switched on with the power button on the casing. The device cannot be
switched on using the power button of a USB keyboard or a Wake-on-LAN signal.
Low Power Soft Off is disabled.
Disabled
Low Power Soft Off is enabled.
Enabled
19.1.4

Power Failure Recovery

Specifies how the system behaves during a reboot following a power failure.
The system switches on briefly, performs a status check (initialisation), and then switches off.
Always Off
The system switches on.
Always On
The system switches on briefly, performs a status check, and then returns the mode it was in before the power failure
Previous State
occurred (ON or OFF).
The system does not switch on.
Disabled
Copyright © 2014 congatec AG
The switch-on sources are managed via BIOS.
The switch-on sources are managed via the ACPI operating system.
IGX1m02
98/134