support USB. Booting the operating system from a USB device is possible.
Auto
Legacy USB support will be disabled if no USB devices are connected.
Legacy USB support should be disabled if the operating system supports USB and you do not want to boot the operating system from USB
devices.
17.5.3
USB Transfer Time-Out
If USB devices are not detected during the POST, it is possible to increase the waiting time so that slower USB devices can also be
detected.
1..5..20 sec
Waiting time setting for USB devices in seconds.
17.5.4
Mass Storage Devices
List of USB Mass Storage Device(s)
Allows the user to force a particular device emulation. When set to Auto, the devices are emulated according to their media format. Optical
drives are emulated as "CD ROM" and drives without data media according to the drive type.
Auto
Emulation is chosen depending on the USB device.
Force USB floppy emulation.
Floppy
Hard Disk
Force USB hard disk emulation.
Force USB CD ROM emulation.
CD-ROM
17.6
USB Port Security
Opens the USB Port Security submenu in order to configure the USB interfaces present on the conga-IGX.
Copyright © 2014 congatec AG
IGX1m02
79/134
Need help?
Do you have a question about the conga-IGX and is the answer not in the manual?
Questions and answers