Receiving A Call From A Remote Party; Answering A Call From A Remote Party - Sony PCS-TL50 Operating Instructions Manual

Receiving a Call from a Remote Party

Operations for answering a call differ depending on the setting of the answer
mode.
Auto answer mode
The system automatically receives a call from a remote party and you can start
conferencing. Although no operation is necessary to start, the picture on the
local site will be displayed on the remote site screen even if you are not ready
to begin.
Manual answer mode
When there is an incoming call, a ringer tone sounds. You need to connect the
call manually before starting the conference.
You can start it whenever you are ready.
Note
You cannot answer the call unless the system is turned on.
For setting of the answer mode, see "Auto Answer" in the Answer Setup menu
on page 43.

Answering a Call from a Remote Party

To answer a call in auto answer mode
When you receive a call, a ringer tone sounds and the message "Incoming
Call" appears on the display. The system is automatically connected and the
picture of the remote party is displayed on the local system and the sound is
heard. The picture and sound on the local site will be enabled on the remote
site at the same time.
The message "Meeting starts!" appears on the display.
You are now ready to start a conference.
Picture on the local site
Picture on the remote site
Meeting starts!
Receiving a Call from a Remote Party
85