Receiving A Call From A Remote Party; Answering Calls (Manual/Auto Answer Mode); Answering A Call From A Remote Party - Sony Ipela PCS-XC1 Operating Instructions Manual

Hide thumbs Also See for Ipela PCS-XC1:
Table of Contents

Advertisement

Receiving a Call from a Remote Party

Operations for answering a call differ depending on the setting of the answer
mode.
Note
The unit is set to manual answer mode under factory default settings.

Answering Calls (Manual/Auto Answer Mode)

Manual answer mode
When there is an incoming call, the unit rings. You need to connect the call
manually.
You can start connecting when you are ready.
Auto answer mode
The system automatically receives a call from a remote party and you can start
connecting. Although no operation is necessary to start, the picture on the local
site will be displayed on the remote site screen even if you are not ready to
begin.
Notes
• You cannot answer the call unless the power switch on the unit is on.
• Make sure that the TV monitor is turned on.
For setting of the answer mode, see "Auto Answer" in the Answer setup menu
on page 45.

Answering a Call from a Remote Party

To receive a call in manual answer mode
When you receive a call, the unit rings and the message "Incoming call.
Answer?" appears on the monitor screen.
Press V, v, B or b to select "OK", then press the ENTER button. The system
is then connected. Once the connection is made, the picture of the remote party
is displayed on the local monitor screen and the sound is heard. The picture and
sound on the local site will be enabled on the remote site at the same time.
The message "Session Connected." appears on the monitor screen.
You are now ready to start a communication.
Note
See pages 102 to 111 to adjust the sound and picture during communication.
Receiving a Call from a Remote Party
89

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pcs-xc1

Table of Contents