Job Accounting; Default Setting - Kyocera KM-2035 Service Manual

(2) Job accounting

Job accounting on/off setting
1. Select [01.JobAccounting] and press the OK key.
2. Select [ON] or [OFF] and press the OK key.
Department ID code registration
1. Select [02.Register code] and press the OK key.
2. Enter a department ID code using the numeric keys
and press the OK key.
Setting range: 0 to 99999999
Deleting department ID codes
1. Select [03.Delete code] and press the OK key.
2. Enter the department ID code to be deleted using
the numeric keys
3. Select [YES] or [NO] and press the OK key.
Clearing the job accounting count
1. Select [04.Count Clear] and press the OK key.
2. Select [YES] or [NO] and press the OK key.
Outputting the job accounting list
1. Select [05.Print list] and press the OK key. If A4/11"
x 8 " paper is present, the list is automatically
1/2
printed out. Otherwise, select the paper source and
press the OK key.

(3) Default setting

User status report
Prints the details of the default settings.
1. Select [01.Copy Status] and press the OK key. If
A4/11" x 8 " paper is present, the list is automati-
1/2
cally printed out.
Otherwise, select the paper source and press the
OK key.
Message language
Selects the language displayed on the message dis-
play.
1. Select [02.Language] and press the OK key.
2. Select the language and press the OK key.
Original image quality
Selects the image quality at power-on.
1. Select [03.Image Quality] and press the OK key.
2. Select [text + ph Dens.], [Photo Density] or [Text
Density] and press the OK key.
Initial density
Selects the exposure mode at power-on.
1. Select [04.Initial Dens.] and press the OK key.
2. Select [Manual] or [Auto] and press the OK key.
EcoPront
Selects the EcoPrint mode at power-on.
1. Select [05.EcoPrint] and press the OK key.
2. Select [On] or [Off] and press the OK key.
Exposure steps
Sets the number of exposure steps for the manual
exposure mode.
1. Select [06.Density steps] and press the OK key.
2. Select [1 step] or [0.5 step] and press the OK key.
Auto exposure adjustment
Adjusts the exposure for the auto exposure mode.
1. Select [07.Auto Density] and press the OK key.
2. Select the setting and press the OK key.
Setting range: 1 (lightest) to 7 (darkest)
Text + photo mode exposure adjustment
Adjusts the exposure to be used when text and photo
original is selected for the image mode.
1. Select [08.Text+Ph Dens.] and press the OK key.
2. Select the setting and press the OK key.
Setting range: 1 (lightest) to 7 (darkest)
2HA/2HB
1-3-61