Kyocera KM-2035 Service Manual page 52

2HA/2HB
Maintenance
item No.
Adjusting the scanner center line
U067
Description
Adjusts the scanner center line of the original scanning.
Purpose
Make the adjustment if there is a regular error between the center lines of the copy image and original.
Caution
Before making this adjustment, ensure that the following adjustments have been made in maintenance mode
U034
(P.1-3-12)
Adjustment
1. Press the start key.
Description
Scanner center line
2. Press the interrupt key.
3. Place an original and press the start key to make a test copy.
4. Change the setting value using the zoom +/- keys.
For copy example 1, increase the value. For copy example 2, decrease the value.
5. Press the start key. The value is set.
Completion
Press the stop/clear key. The indication for selecting a maintenance item No. appears.
Adjusting the scanning position for originals from the DP
U068
Description
Adjusts the position for scanning originals from the DP.
Purpose
Used when there is a regular error between the leading edges of the original and the copy image when the DP
is used.
Method
Press the start key.
Setting
1. Change the setting using the zoom +/- keys.
Description
Scanning position
Increasing the value moves the image backward, and decreasing it moves the image forward.
Supplement
While this maintenance item is being executed, test copying from an original is available.
Completion
Press the stop/clear key. The indication for selecting a maintenance item No. appears.
1-3-20
Description
U072
U067
(P.1-3-23)
Scanner center line
Original
Figure 1-3-9
Setting range
-17 to 17
Setting range
-66 to 66
Copy Copy
example 1 example 2
Initial setting Change in value per step
0 0.254 mm
Initial setting
-4