Kyocera KM-2035 Service Manual page 101

Section Jam code
Feedshift 54
section
55
56
Duplex sec- 60
tion
61
DP 70
71
72
73
74
75
*: Optional.
Description
Misfeed in the feedshift
section* (paper feed from
first paper feeder)
Misfeed in the feedshift
section* (paper feed from
second paper feeder)
Misfeed in the feedshift
section* (paper feed from
third paper feeder)
Misfeed in duplex paper
conveying section*
Misfeed in duplex exit sec-
tion*
No original feed*
An original jam in the orig-
inal conveying section 1*
An original size error jam*
An original jam in the orig-
inal conveying section 2*
An original jam in the orig-
inal conveying section 3*
An original jam in the orig-
inal switchback section*
The feedshift switch (FSSW) does not turn off within 6320 ms
of feedshift switch (FSSW) turning on.
The feedshift switch (FSSW) does not turn off within 1530 ms
of paper switchback.
The feedshift switch (FSSW) does not turn on within 1530 ms
of paper switchback.
The feedshift switch (FSSW) does not turn off within 6320 ms
of feedshift switch (FSSW) turning on.
The feedshift switch (FSSW) does not turn off within 1530 ms
of paper switchback.
The feedshift switch (FSSW) does not turn on within 1530 ms
of paper switchback.
The feedshift switch (FSSW) does not turn off within 6320 ms
of feedshift switch (FSSW) turning on.
The feedshift switch (FSSW) does not turn off within 1530 ms
of paper switchback.
The feedshift switch (FSSW) does not turn on within 1530 ms
of paper switchback.
The duplex paper conveying switch (DUPPCSW)* does not turn
off within 3280 ms of the feedshift switch (FSSW) turning on.
The duplex paper conveying switch (DUPPCSW)* does not turn
on within 3280 ms of the feedshift switch (FSSW) turning on.
The duplex paper conveying switch (DUPPCSW)* does not turn
off within 3280 ms of the feedshift switch (FSSW) turning off.
The registration switch (RSW) does not turn on within 1760 ms
of the duplex paper conveying switch (DUPPCSW)* turning on.
The registration switch (RSW) does not turn off within 1760 ms
of the duplex paper conveying switch (DUPPCSW)* turning off.
During the primary feed of the second original in the single-
sided or double-sided original mode, even if retry operation is
performed five times, primary original feed is not performed.
During the secondary original feed in the single-sided or dou-
ble-sided original mode, the DP timing switch (DPTSW)* does
not turn off within 6500 ms of the original conveying motor
(OCM)* turning on.
During the secondary original feed in the single-sided or double-
sided original mode, the DP timing switch (DPTSW)* does turn off
within 750 ms of the original conveying motor (OCM)* turning on.
During scanning of the second side or reversing of the original
for ejection in the double-sided original mode, the DP timing
switch (DPTSW)* does not turn off within 6500 ms of the origi-
nal conveying motor (OCM)* turning on.
During scanning of the second side or reversing of the original
for ejection in the double-sided original mode, the DP timing
switch (DPTSW)* does not turn on within 750 ms of the origi-
nal conveying motor (OCM)* turning on.
During the switchback operation of an original in the double-
sided original mode, the original switchback switch (OSBSW)
*does not turn on within 1300 ms of the original conveying
motor (OCM)* turning on.
Conditions
2HA/2HB
1-4-5