Kyocera KM-2035 Service Manual page 46

2HA/2HB
Maintenance
item No.
Adjustment: trailing edge margin adjustment
U034
1. Select group 3 using the image mode selection key.
(cont.)
Description
Trailing edge margin adjustment
2. Press the interrupt key.
3. Press the start key to output a test pattern.
4. Change the setting value using the zoom +/- keys.
For output example, increase the value.
5. Press the start key. The value is set.
Completion
Press the stop/clear key. The indication for selecting a maintenance item No. appears.
Setting folio size
U035
Description
Changes the image area for copying onto folio size paper.
Purpose
To prevent the image at the trailing edge, or right or left side of the paper from not being copied by setting the
actual size of the folio paper used.
Method
Press the start key.
Setting
1. Select the item to be set using the exposure adjustment keys.
2. Change the setting using the zoom +/- keys.
Exposure indicator
Exp. 1
Exp. 2
3. Press the start key. The value is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
1-3-14
Description
Setting
range
-4.0 to 10.0
Trailing edge margin
Correct image
Figure 1-3-3
Setting
Length
Width
Initial Change in
setting value per step
0.0 1.0 mm
Output
example
Setting range Initial setting
330 to 356 mm 330
200 to 220 mm 210