Kyocera KM-2035 Service Manual page 76

2HA/2HB
Maintenance
item No.
Switching between duplex/simplex copy mode
U343
Description
Switches the Initial setting between duplex and simplex copy.
Purpose
To be set, according to frequency of use, to the more frequently used mode.
Method
Press the start key.
Setting
1. Select "on"or "oFF"using the zoom +/- keys.
Display
on
oFF
Initial setting: Simplex copy
2. Press the start key. The setting is set. The indication for selecting a maintenance item No. appears.
Completion
Press the stop/clear key. The indication for selecting a maintenance item No. appears.
Setting preheat/energy saver mode
U344
Description
Changes the control for preheat/energy saver mode.
Purpose
To be set according to user request.
Method
Press the start key.
Setting
1. Change the setting using the zoom +/- keys.
Display
0
1
Initial setting: ENERGY STAR
If GEEA is set, the Auto off mode setting is fixed to ON and cannot be changed. The maximum time for
entering the low power mode and the off mode becomes 120 minutes.
2. Press the start key. The setting is set. The indication for selecting a maintenance item No. appears.
Completion
Press the stop/clear key. The indication for selecting a maintenance item No. appears.
Setting the value for maintenance due indication
U345
Description
Sets when to display a message notifying that the time for maintenance is about to be reached, by setting the
number of copies that can be made before the current maintenance cycle ends.
When the difference between the number of copies of the maintenance cycle and that of the maintenance
count reaches the set value, the message is displayed.
This maintenance mode is effective for only Japanese specification.
1-3-44
Description
Description
Duplex copy
Simplex copy
Description
ENERGY STAR
GEEA