Kyocera KM-2035 Service Manual page 95

MP tray paper size
Sets the paper size for the MP tray so that it will be
automatically selected.
1. Select [23.MPTray Config] and press the OK key.
2. Select the paper size and press the OK key.
Custom 1 size
Sets the size of the paper to be set to the custom 1
size.
1. Select [24.Custom Size 1] and press the OK key.
2. Select the paper size and press the OK key.
Custom 2 size
Sets the size of the paper to be set to the custom 2
size.
1. Select [25.Custom Size 2] and press the OK key.
2. Select the paper size and press the OK key.
Selecting media type (cassette 1)
Sets the paper type to the cassette.
1. Select [26.Casst1MedType] and press the OK key.
2. Select the paper type and press the OK key.
Selecting media type (cassette 2)
Sets the paper type to the first paper feeder.
1. Select [27.Casst2MedType] and press the OK key.
2. Select the paper type and press the OK key.
This will be displayed when the optional paper
feeder is installed.
Selecting media type (cassette 3)
Sets the paper type to the second paper feeder.
1. Select [28.Casst3MedType] and press the OK key.
2. Select the paper type and press the OK key.
This will be displayed when the optional paper
feeder is installed.
Selecting media type (cassette 4)
Sets the paper type to the third paper feeder.
1. Select [29.Casst4MedType] and press the OK key.
2. Select the paper type and press the OK key.
This will be displayed when the optional paper
feeder is installed.
Specifying the paper weight and 2-sided copying to
custom paper
Sets the paper weights and 2-sided copying to the cus-
tom 1 to 8.
1. Select [30.CustmMedType1] to
[37.CustmMedType8] and press the OK key.
2. Select the paper weight and press the OK key.
Extra Heavy/Heavy 3/Heavy 2/Heavy 1/Normal 3/
Normal 2/Normal 1/Light (Vellum)
3. Select [On] or [Off] and press the OK key.
Auto detect originals
Predetermines what paper size is selected for printing
when copying an original document of non-standard
sizes.
1. Select [38.Hagaki/A6RDet] and press the OK key.
2. Select [Hagaki] or [A6 R] and press the OK key.
Auto detect originals
Predetermines what paper size is selected for printing
when copying an original document of non-standard
sizes.
1. Select [39.B4R/Folio Det] and press the OK key.
2. Select [B4 R] or [Folio R] and press the OK key.
Auto detect originals
When the size of original document is 11" x15", the
original document is automatically zoomed.
1. Select [40.11x15" Detect] and press the OK key.
2. Select [On] or [Off] and press the OK key.
Copy limit
Sets the number of copies limit for multiple copying.
1. Select [41.Copy Limit] and press the OK key.
2. Enter the setting and press the OK key.
Setting range: 1 to 999
2-sided copy reverse-side rotation setting
Select whether or not the image on the reverse side is
rotated 180 degrees in the 2-sided copy mode.
1. Select [42.Duplex 2nd] and press the OK key.
2. Select [On] or [Off] and press the OK key.
Margin shift
Sets the default setting of the margin width for the mar-
gin copying.
1. Select [43.Stitch Width] and press the OK key.
2. Select the setting and press the OK key.
Setting range: 1 to 18 mm/0.13" to 0,75"
Border width
Sets the default setting of the border width for the bor-
der erase mode.
1. Select [44.Border Erase] and press the OK key.
2. Select the setting and press the OK key.
Setting range: 1 to 18 mm/0.13" to 0,75"
4 in 1 layout order
Sets the layout for the order in which the originals will
appear in the 4 in 1 layout mode.
1. Select [45.4 in 1 Layout] and press the OK key.
2. Select the setting and press the OK key.
Portrait 1/Portrait 2/Landscape 1/Landscape 2
2HA/2HB
1-3-63