Kyocera KM-2035 Service Manual page 80

2HA/2HB
Maintenance
item No.
Adjusting the leading edge registration for memory image printing
U407
Description
Adjusts the leading edge registration during memory copying.
Purpose
Make the adjustment if there is a regular error between the leading edges of the copy image and original dur-
ing memory copying.
Caution
Before making this adjustment, ensure that the following adjustments have been made in maintenance mode
U053
(P.1-3-16)
Adjustment
1. Press the start key.
Description
Leading edge registration for memory image
printing
2. Press the interrupt key.
3. Place an original and press the start key to make a test copy.
4. Change the setting value using the zoom +/- keys.
For copy example 1, increase the value.
For copy example 2, decrease the value.
5. Press the start key. The value is set.
Completion
Press the stop/clear key. The indication for selecting a maintenance item No. appears.
1-3-48
U034 U065
(P.1-3-12) (P.1-3-18)
Original
Description
U066
(P.1-3-19)
Setting
range
-10.0 to 10.0
Copy Copy
example 1 example 2
Figure 1-3-18
U407
Initial Change in
setting value per step
0.0 1.0 mm