Kyocera KM-2035 Service Manual page 47

Maintenance
item No.
Adjusting the amount of slack in the paper
U051
Description
Adjusts the amount of slack in the paper at the registration roller.
Purpose
Make the adjustment if the leading edge of the copy image is missing or varies randomly, or if the copy paper
is Z-folded.
Adjustment
1. Press the start key.
2. Select the item using the exposure adjustment keys.
Exposure
indicator
Exp. 1 (lit)
Exp. 2 (lit)
Exp. 3 (lit)
Exp. 4 (lit)
Exp. 5 (lit)
Exp. 1 (flashing) Duplex mode
3. Press the interrupt key.
4. Place an original and press the start key to make a test copy.
5. Change the setting value using the zoom +/- keys.
For output example 1, increase the value. For output example 2, decrease the value.
The greater the value, the larger the amount of slack; the smaller the value, the smaller the amount of
slack.
6. Press the start key. The value is set.
Completion
Press the stop/clear key. The indication for selecting a maintenance item No. appears.
Description
Description
Paper feed from drawer
Paper feed from MP tray
Paper feed from optional first
paper feeder
Paper feed from optional second
paper feeder
Paper feed from optional third
paper feeder
Original
Figure 1-3-4
Setting
range
-50 to 127
-50 to 127
-50 to 127
-50 to 127
-50 to 127
-50 to 127
Copy Copy
example 1 example 2
Initial Change in
setting value per step
20 0.32 mm
0 0.32 mm
0 0.32 mm
-20 0.32 mm
-20 0.32 mm
0 0.32 mm
2HA/2HB
1-3-15