Paper Misfeeds - Kyocera KM-2035 Service Manual

2HA/2HB

(3) Paper misfeeds

Copier
Problem
(1)
A paper jam in the
paper feed, paper
conveying or exit
section is indicated
as soon as the power
switch is turned on.
Jam code 00
(2)
A paper jam in the
paper feed section is
indicated during
copying (no paper
feed from the MP
tray).
Jam code 10
(3)
A paper jam in the
paper feed section is
indicated during
copying (no paper
feed from the drawer
1).
Jam code 11
1-4-6
Causes/check procedures
A piece of paper torn from
copy paper is caught
around registration switch,
exit switch or feedshift
switch.
Defective registration
switch, exit switch or feed-
shift switch.
Paper on the MP tray is
extremely curled.
Check if the MP paper feed
pulley is deformed.
Broken registration switch
actuator.
Defective registration
switch.
Check if the MP paper feed
clutch malfunctions.
Electrical problem with the
MP paper feed clutch.
Paper in the drawer is
extremely curled.
Check if the paper feed pul-
ley, separation pulley or for-
ward pulley is deformed.
Broken registration switch
actuator.
Defective registration
switch.
Check if the paper feed
clutch malfunctions.
Electrical problem with the
paper feed clutch.
Corrective measures
Check visually and remove it, if any.
Run maintenance item U031 and turn each switch on and off
manually. Replace the corresponding switch if indication of switch
is not light.
Change the paper.
Check visually and replace any deformed pulley.
Check visually and replace registration switch if its actuator is bro-
ken.
Run maintenance item U031 and turn registration switch on and
off manually. Replace registration switch if indication of switch is
not light.
Run maintenance item U032 and select the MP paper feed clutch
to be turned on and off. Check the status and remedy if neces-
sary.
Check (see page 1-4-26).
Change the paper.
Check visually and replace any deformed pulley.
Check visually and replace registration switch if its actuator is bro-
ken.
Run maintenance item U031 and turn registration switch on and
off manually. Replace registration switch if indication of switch is
not light.
Run maintenance item U032 and select the paper feed clutch to
be turned on and off. Check the status and remedy if necessary.
Check (see page 1-4-26).