Kyocera KM-2035 Service Manual page 100

2HA/2HB
Section Jam code
Paper con- 23
veying sec-
tion
24
Transfer 30
section
Fuser sec- 40
tion
41
42
43
44
45
Exit section 50
Feedshift 52
section
53
*: Optional.
1-4-4
Description
Multiple sheets in the
drawer 3* (second paper
feeder)
Multiple sheets in the
drawer 4* (third paper
feeder)
Misfeed in registration/
transfer section
Misfeed in the fuser sec-
tion (paper feed from MP
tray)
Misfeed in the fuser
section (paper feed from
drawer)
Misfeed in the fuser
section* (paper feed from
first paper feeder)
Misfeed in the fuser
section* (paper feed from
second paper feeder)
Misfeed in the fuser
section* (paper feed from
third paper feeder)
Misfeed in the fuser
section* (paper feed from
duplex section)
Misfeed in the exit section
Misfeed in the feedshift
section (paper feed from
MP tray)
Misfeed in the feedshift
section (paper feed from
drawer)
The drawer feed switch 1 (DFSW1)* does not turn off within
6320 ms of drawer feed switch 1 (DFSW1)* turning on.
The drawer feed switch 1 (DFSW1)* does not turn off within
2560 ms of drawer paper feed clutch 2 (DPFCL2)* turning on.
The drawer feed switch 2 (DFSW2)* does not turn off within
6320 ms of drawer feed switch 2 (DFSW2)* turning on.
The drawer feed switch 2 (DFSW2)* does not turn off within
2560 ms of drawer paper feed clutch 3 (DPFCL3)* turning on.
The registration switch (RSW) does not turn off within 2340 ms
of drawer feed switch 1 (DFSW1)* turning on.
The registration switch (RSW) does not turn off within 2340 ms
of drawer feed switch 1 (DFSW1)* turning off.
The registration switch (RSW) does not turn off within 1760 ms
of duplex paper conveying switch (DUPPCSW1)* turning on.
The exit switch (ESW) does not turn on within 3020 ms of the
registration motor (RM) turning on.
The exit switch (ESW) does not turn on within 3020 ms of the
registration motor (RM) turning on.
The exit switch (ESW) does not turn on within 3020 ms of the
registration motor (RM) turning on.
The exit switch (ESW) does not turn on within 3020 ms of the
registration motor (RM) turning on.
The exit switch (ESW) does not turn on within 3020 ms of the
registration motor (RM) turning on.
The exit switch (ESW) does not turn on within 3020 ms of the
registration motor (RM) turning on.
The exit switch (ESW) does not turn off within 3020 ms of the
registration switch (RSW) turning off.
The exit switch (ESW) does not turn on within 3020 ms of the
registration motor (RM) turning on.
The feedshift switch (FSSW) does not turn off within 6320 ms
of feedshift switch (FSSW) turning on.
The feedshift switch (FSSW) does not turn off within 1530 ms
of paper switchback.
The feedshift switch (FSSW) does not turn on within 1530 ms
of paper switchback.
The feedshift switch (FSSW) does not turn off within 6320 ms
of feedshift switch (FSSW) turning on.
The feedshift switch (FSSW) does not turn off within 1530 ms
of paper switchback.
The feedshift switch (FSSW) does not turn on within 1530 ms
of paper switchback.
Conditions