Chart Of Image Adjustment Procedures - Kyocera KM-2035 Service Manual

Chart of image adjustment procedures

Adjusting
Item
order
Adjusting the magnification in the
main scanning direction (printing
adjustment)
Adjusting the magnification in the
auxiliary scanning direction (print-
ing adjustment)
Adjusting the center line of the MP
tray (printing adjustment)
Adjusting the center line of the
drawers (printing adjustment)
Adjusting the leading edge registra-
tion of the MP tray (printing adjust-
ment)
Adjusting the leading edge registra-
tion of the drawer (printing adjust-
ment)
Adjusting the leading edge margin
(printing adjustment)
Adjusting the trailing edge margin
(printing adjustment)
Adjusting the left and right margins
(printing adjustment)
Adjusting magnification of the
scanner in the main scanning direc-
tion (scanning adjustment)
Image Description
Polygon motor speed adjustment
Drive motor speed adjustment
Adjusting the LSU print start timing
Adjusting the LSU print start timing
Registration motor turning on timing (sec-
ondary paper feed start timing)
Registration motor turning on timing (sec-
ondary paper feed start timing)
LSU illumination start timing
LSU illumination start timing
LSU illumination start/end timing
Data processing
Maintenance mode
Original
Item No. Exposure indicator
U053 Exp.2 (light) U053 test pattern
U053 Exp.1 (light) U053 test pattern
U034 Exp.2 (light) U034 test pattern
U034 Exp.1 (light) U034 test pattern
U034 Exp.2 (light) U034 test pattern
U034 Exp.1 (light) U034 test pattern
U402 Exp.1 (light) U402 test pattern
U402 Exp.3 (light) U402 test pattern
U402 Exp.2 (light) U402 test pattern
U065 Exp.1 (light) Test chart
Page Remarks
P.1-3-16
P.1-3-16
P.1-3-13
P.1-3-13 To make an adjustment for duplex copying, select
"exp.1 (flashing)".
P.1-3-12
P.1-3-12 To make an adjustment for duplex copying, select
"exp.1 (flashing)".
P.1-3-45
P.1-3-45
P.1-3-45
P.1-3-18 No adjustment for copying using the DP.
2HA/2HB
2-4-8