Maintenance
item No.
Adjusting the scanner leading edge registration
U066
Description
Adjusts the scanner leading edge registration of the original scanning.
Purpose
Make the adjustment if there is a regular error between the leading edges of the copy image and original.
Caution
Before making this adjustment, ensure that the following adjustments have been made in maintenance mode
U034
(P.1-3-12)
Adjustment
1. Press the start key.
Description
Scanner leading edge registration
2. Press the interrupt key.
3. Place an original and press the start key to make a test copy.
4. Change the setting value using the zoom +/- keys.
For copy example 1, decrease the value. For copy example 2, increase the value.
5. Press the start key. The value is set.
Completion
Press the stop/clear key. The indication for selecting a maintenance item No. appears.
Description
U071
U066
(P.1-3-22)
Scanner leading edge registration
Original
Figure 1-3-8
Setting range
-32 to 20
Copy
Copy
example 2
example 1
2HA/2HB
Initial setting
7
1-3-19