Kyocera KM-2035 Service Manual page 74

2HA/2HB
Maintenance
item No.
Changing the copy count timing
U260
Description
Changes the copy count timing for the total counter and other counters.
Purpose
To be set according to user (copy service provider) request. If a paper jam occurs frequently in the eject sec-
tion when the number of copies is counted at the time of paper ejection, copies are provided without copy
counts. The copy service provider cannot charge for such copying. To prevent this, the copy timing should be
made earlier. If a paper jam occurs frequently in the paper conveying or fuser sections when the number of
copies is counted before the paper reaches those sections, copying is charged without a copy being made. To
prevent this, the copy timing should be made later.
Method
Press the start key.
Setting
1. Select the copy count timing using the zoom +/- keys.
Display
FEd
EJE
Initial setting: EJE
2. Press the start key. The setting is set, and the indication for selecting a maintenance item No. appears.
Completion
Press the stop/clear key. The indication for selecting a maintenance item No. appears.
Setting the destination specifications
U265
Description
Sets whether or not to print the product name on the reports that users print.
Purpose
To be set according to user request.
Method
Press the start key.
Setting
1. Enter "0" or "2" using the zoom +/- keys.
Setting
0
2
Initial setting: 0
2. Press the start key. The setting is set.
Completion
Press the stop/clear key. The indication for selecting a maintenance item No. appears.
Setting auto application change time
U277
Description
Sets the time that passes until the machine starts automatically printing after completing copying or operation
when the machine is used as a printer.
Purpose
According to user request, changes the setting.
Method
Press the start key.
Setting
1. Change the setting using the zoom +/- keys.
Description
Switching time
The setting can be changed by 30 s per step.
2. Press the start key. The value is set, and the indication for selecting a maintenance item No. appears.
Completion
Press the stop/clear key. The indication for selecting a maintenance item No. appears.
1-3-42
Description
Description
When secondary paper feed starts
When the paper is ejected
Description
Product name printed
Product name not printed
Setting range
30 to 270 (s)
Initial setting
30