Kyocera KM-1530 Instruction Handbook Manual
Printing system (k) set-up edition
Hide thumbs
Also See for KM-1530:
- Quick configuration manual (205 pages) ,
- User manual (154 pages) ,
- Instruction handbook manual (115 pages)
Table of Contents
Troubleshooting
Related Manuals for Kyocera KM-1530
Summary of Contents for Kyocera KM-1530
- Page 1 INSTRUCTION HANDBOOK <Set-up Edition> ALWAYS read this Instruction Handbook thoroughly before use. After reading, maintain it in good condition and keep it together with the Instruction Handbook for your copier.
-
Page 3: Trademark Information
Trademark Information • Novell and NetWare are registered trademarks of Novell, Inc. • IBM and IBM PC-AT are trademarks of International Business Machines Corporation. • PowerPC is a trademark of International Business Machines Corporation of America and other corporations. • Adobe and Acrobat are trademarks of Adobe Systems Incorporated. •... - Page 4 IBM PROGRAM LICENSE AGREEMENT THE DEVICE YOU HAVE PURCHASED CONTAINS ONE OR MORE SOFTWARE PROGRAMS (“PROGRAMS”) WHICH BELONG TO INTERNATIONAL BUSINESS MACHINES CORPORATION (“IBM”). THIS DOCUMENT DEFINES THE TERMS AND CONDITIONS UNDER WHICH THE SOFTWARE IS BEING LICENSED TO YOU BY IBM. IF YOU DO NOT AGREE WITH THE TERMS AND CONDITIONS OF THIS LICENSE, THEN WITHIN 14 DAYS AFTER YOUR ACQUISITION OF THE DEVICE YOU MAY RETURN THE DEVICE FOR A FULL REFUND.
- Page 5 About this Instruction Handbook This Instruction Handbook <Set-up Edition> is meant to be read when the Printer Board is installed in your copier and the copier is to be used mainly as a local printer. It contains explanations on set-up procedures for using the copier as a printer. As the required set-up and configurations for the printer may differ depending upon the environment in use in the connected computer, please read those sections related to your specific computer environment and perform the appropriate set-up and configuration explained there.
- Page 6 Getting connected When connecting the printer directly to your computer (with a parallel cable) ... 1 Connecting the printer directly to your computer with a parallel Page 5 cable ........Parallel cable 2 Installing the printer driver into your computer ... Refer to the On-Line Manual CD-ROM When connecting the printer to a network (the optional Network Card must be installed)…...
-
Page 7: Table Of Contents
Table of contents 1. Preparations ......................2 1-1 Accessories ..............................2 1-2 Required items ............................2 1-3 Name of parts (main body) ........................2 1-4 Name of parts (operation panel) ........................ 3 2. Set-up ........................5 2-1 Connecting the printer cable ........................5 2-2 Installing the software ..........................5 2-3 Network (TCP/IP) settings .........................6 3. -
Page 8: Preparations
1. Preparations Accessories • 1 CD-ROM • This Instruction Handbook Required items • Parallel cable Name of parts (main body) 1 Parallel interface connector Connect a bi-directional parallel cable here. 2 Memory Card (CompactFlash) slot Insert the optional Memory Card (CompactFlash) here. 3 Main switch Turn this switch ON ( | ) first, prior to using the printer. -
Page 9: Name Of Parts (Operation Panel)
1. Preparations Name of parts (operation panel) 15 ppm copier - Inch specifications 15 ppm copier - Metric specifications G The copy quality/magnification display in the printer mode 1 Printer key Press this key when you want to switch to the printer mode. To enter the printer mode, press the Printer key. - Page 10 1. Preparations 20 ppm copier - Inch specifications 20 ppm copier - Metric specifications 1 Printer key 9 Message display Press this key when you want to switch to the printer mode. Indicates the status of the printer as well as other settings. 2 Enter key G The message display in the printer mode Press this key when you want to register a setting.
-
Page 11: Set-Up
2. Set-up Connecting the printer cable Installing the software CAUTION: ALWAYS turn the main switch to the printer OFF (O) Perform the following procedure to install into your computer the BEFORE connecting the printer cable. printer driver and other software that is appropriate to the operating system in use in that computer. -
Page 12: Network (Tcp/Ip) Settings
2. Set-up Use the M and N keys to select “2” (Off) and then press the Network (TCP/IP) settings Enter key. The selected setting will flash twice and will then be registered. When the optional Network Card is installed and this machine is to be used as a network printer, it is necessary to set the corresponding IP address for the printer. - Page 13 2. Set-up Use the M and N cursor keys to select “On” and then press <20 ppm copier> the Enter key. * To cancel the setting midway through it, press the Stop/Clear key. Press the Printer key. The machine will switch to the printer mode.
- Page 14 2. Set-up The numeric keys will be used to enter the IP address: Use the M and N cursor keys to select “Gateway” and then First, enter the first 3 digits of the IP address. press the Enter key. * The numbers you enter will be input into the currently highlighted area of the display.
-
Page 15: Troubleshooting
3. Troubleshooting Canceling printing Perform the following procedure when you want to stop printing or you want to clear data. IMPORTANT! • By performing this operation you will be canceling ALL print jobs that are currently waiting in the printer’s memory to be printed. •... -
Page 16: When An Error Code Or Error Messages Appears
3. Troubleshooting When an error code or error messages appears… If an error code or message appears on the operation panel, first check the following tables for cause of the trouble and then perform the corresponding procedure. For more detailed information, refer to the Instruction Handbook for your copier as well as the Instruction Handbook for any optional equipment that is installed in your machine. - Page 17 3. Troubleshooting Error code Display message Procedure (15 ppm copier) (20 ppm copier) — No duplex from bypass Duplex printing is not possible using the Multi-Bypass. Select the drawer for paper feed. * If you want to print out on only one side of the paper, first press the Printer key to switch to the printer mode.
- Page 18 3. Troubleshooting Error code Display message Procedure (15 ppm copier) (20 ppm copier) Print overrun <15 ppm copier> A data overrun error has occurred due to insufficient memory. • If you want to force-continue the print job, press the Start key. If you want to cancel the printing operation completely, press the Stop/Clear key.
- Page 19 3. Troubleshooting Error code Display message Procedure (15 ppm copier) (20 ppm copier) RAM error An error has been detected during operation. Turn the main switch to the printer OFF (O) and then back ON ( | ) again. If the same error message remains, contact your service representative or an authorized service center.
-
Page 20: Basic Troubleshooting Chart
3. Troubleshooting Basic troubleshooting chart If you experience trouble while you are using this machine as a printer, refer to the table below to perform minor adjustments. If trouble persists, contact your service representative or an authorized service center. * For information in regard to general mechanical trouble with the machine, refer to the Instruction Handbook for your copier. Problem Check point Procedure... -
Page 21: Specifications
4. Specifications CPU ..............PowerPC 405 (200MHz) Printing Speed ........... 15 ppm copier: WITHOUT Memory Board installed - 15 pages/min (A4 [8 1/2" x 11"]) WITH Memory Board installed - 18 pages/min (A4 [8 1/2" x 11"]) 20 ppm copier: 20 pages/min (A4 [8 1/2" x 11"]) Printing Resolution .......... - Page 24 2000. 9 3BK80050A...