Polycom VSX Series Integrator's Reference Manual page 93

Command Syntax
testlan • "ipaddress": Sends UDP packets
(continued) to this IP address and returns an
echo message with specific
information when followed by any of
these parameters:
length
mps
reps
wai
echoport
locaport
For an echo message showing only the
default settings, omit optional
parameters.
• "length": Message length in bytes.
• "mps": Number of messages per
second (max = 100).
• "reps": Number of times to repeat
the message.
• "wait": Number of seconds to wait.
• "echoport": Port numbers to use.
• "localport": Port numbers to use.
© Polycom, Inc.
Description
Chapter 3 - System Commands
Example
Example 5
testlan ping
192.168.1.200 5
Example 6
testlan echo
192.168.1.159
returns information
similar to this:
testlan: echo
d836969f 100 10 10
100 7 1024
testlan: returned
length is 100 byte
testlan: sent=10,
received=10,
lost=0,
delayed=0,
corrupt=0
testlan: sent=20,
received=20,
lost=0,
delayed=0,
corrupt=0
testlan: sent=30,
received=30,
lost=0,
delayed=0,
corrupt=0
testlan: sent=40,
received=40,
lost=0,
delayed=0,
corrupt=0
testlan: sent=50,
received=50,
lost=0,
delayed=0,
corrupt=0
testlan: sent=60,
received=60,
lost=0,
delayed=0,
corrupt=0
testlan: sent=70,
received=70,
lost=0,
delayed=0,
corrupt=0
3 - 53