Polycom VSX Series Integrator's Reference Manual page 108

Integrator's Reference Manual for the VSX Series
Command Syntax
wanipad- wanipaddress <set|get>
dress
wanipaddress set ["ipaddress"]
Where:
• set: Sets the WAN IP address when
followed by the "ipaddress"
parameter. To erase the current
setting, omit the "ipaddress"
parameter.
• get: Returns the WAN IP address.
• "ipaddress": WAN IP address.
winsresolu- winsresolution <yes|no|get>
tion
Where:
• yes: Enables WINS resolution.
• no: Disables WINS resolution.
• get: Returns the current setting (yes
or no).
3 - 68
Description
Sets the WAN IP address.
User interface screen location:
System > Admin Settings >
Network > IP > Firewall:
NAT Public (WAN) Address
Note: The NAT Configuration
option on the same page must
be set to Auto, Manual, or UPnP
for this option to be available.
Sets WINS resolution. After a
change is made, the system
prompts the user for restart.
User interface screen location:
System > Admin Settings >
LAN Properties (page 2):
WINS Resolution
www.polycom.com/videodocumentation
Example
wanipaddress set
192.168.1.122
winsresolution no