Polycom VSX Series Integrator's Reference Manual page 105

Command Syntax
lanport lanport
<auto|autohdx|autofdx|"rate"|get>
Where:
• auto: Automatically negotiates the
LAN speed and duplex mode.
• autohdx: Automatically negotiates
the LAN speed but specifies
half-duplex mode.
• audofdx: Automatically negotiates
the LAN speed but specifies
full-duplex mode.
• "rate": Lan speed and duplex
mode:
10: 10 Mbps auto duplex
10hdx: 10 Mbps half duplex
10fdx: 10 Mbps full duplex
100: 100 Mbps auto duplex
100hdx: 100 Mbps half duplex
100fdx: 100 Mbps full duplex
• get: Returns the current setting.
numdigits- numdigitsdid <{0..99}|get>
did
Where:
• {0..99}: Specifies the number of
digits in DID numbers.
• get: Returns the current setting.
© Polycom, Inc.
Description
Sets the LAN port settings of the
VSX system. After making a
change, you must restart the
system.
User interface screen location:
System > Admin Settings >
LAN Properties (page 2): LAN
Speed and Duplex Mode
Sets the number of digits in the
DID Gateway number (E.164
dialing). The number of digits in
the DID is that portion of the full
DID that the Gateway will be
given from the ISDN service
provider as the Called Party
Line Identifier. This, in turn, will
be passed to the Gatekeeper for
address resolution.
User interface screen location:
System > Admin Settings >
Network > IP > H.323 Settings
(page 4): Number of Digits in
DID Number
Note: For this option to be avail-
able, the Gateway Number
Type on the same page must be
set to Direct Inward Dial.
Chapter 3 - System Commands
Example
lanport auto
numdigitsdid 7
3 - 65