Polycom VSX Series Integrator's Reference Manual page 106

Integrator's Reference Manual for the VSX Series
Command Syntax
numdigit- numdigitsext <{0..99}|get>
sext
Where:
• {0..99}: The number of digits in the
gateway number if
gatewaynumbertype is set to
number+extension.
• get: Returns the current setting.
subnetmask subnetmask <set|get> ["ipaddress"]
subnetmask set ["ipaddress"]
Where:
• set: Sets the subnet mask of the
VSX system when followed by the
"ipaddress" parameter. To erase the
current setting, omit "ipaddress".
• get: Returns the current subnet
mask.
• "ipaddress": Subnet mask of the
VSX system.
tcpports tcpports <set|get> [{1024..49150}]
tcpports set [{1024..49150}]
Where:
• set: Sets the TCP ports when
followed by a value from the range
{1024..49150}. To erase the current
setting, omit the value.
• get: Returns the current TCP port
setting.
3 - 66
Description
Sets the number of digits in the
Number+Extension Gateway
number (E.164 dialing). The
number of digits in that number
is that portion of the full Num-
ber+Extension number that the
Gateway will be given from the
ISDN service provider as the
Called Party Line Identifier.
This, in turn, will be passed to
the Gatekeeper for address
resolution.
User interface screen location:
System > Admin Settings >
Network > IP > H.323 Settings
(page 4): Number of Digits in
Extension
Sets the subnet mask of the
VSX system. After making a
change, the user is prompted to
restart the system.
User interface screen location:
System > Admin Settings >
LAN Properties (page 2):
Subnet Mask
Sets the TCP ports on the
VSX system.
User interface screen location:
System > Admin Settings >
Network > IP > Firewall: Fixed
Ports > TCP Ports
Note: The Fixed Ports option on
the same page must be selected
for the TCP Ports option to be
available.
www.polycom.com/videodocumentation
Example
numdigitsext 10
subnetmask set
255.255.255.0
tcpports set 3233