Powercam Secondary Control Cable (Vsx 8000) - Polycom VSX Series Integrator's Reference Manual
Vsx series
Hide thumbs
Also See for VSX Series:
- Administrator's manual (248 pages) ,
- Getting started manual (48 pages) ,
- Setting up (6 pages)
Table of Contents
Advertisement
Integrator's Reference Manual for the VSX Series
PowerCam Secondary Control Cable (VSX 8000)
Description
8-pin mini-DIN to DB-15
P1
15 Pin D-sub
Male
1 - 18
This cable connects a VSX 8000 to a D30 or D100 camera VISCA port, or to a
Break-Out cable that is also connected to a PowerCam camera and a power supply.
This combination is required for distances more than 10 ft away.
Used With
VSX 8000 (requires
DB-15 to DB-9
adapter if used for a
secondary camera)
P1 15 Pin D Connector
Pin #
Signal Name
1-6, 9-11, 13
NC
7
SW-RX/SN-TX
8
IR-SIGNAL
12
P GND
14
SW-TX/SN-RX
15
IR RETURN
SHIELD
This drawing is provided for design reference only. Polycom claims no responsibility or
liability for the quality, performance and/or reliability of cables based on this reference
drawing. Cables are available from Polycom that meet the appropriate manufacturing
tolerances, quality and performance parameters.
Part Number
1457-50527-001
50' ± 3.0"
P2 VISCA 8 Pin mini Din
Pin #
Signal Name
1, 2, 8
NC
3
SW-RX/SN-TX
7
IR OUT
4
GND
5
SW-TX/SN-RX
6
GND
SHIELD
www.polycom.com/videodocumentation
Length
Shipped Length: 50 ft (15 m)
P2
8 Pin Mini Din
Male
Advertisement
Table of Contents
