Polycom VSX Series Integrator's Reference Manual page 117

Command Syntax
prinumber- prinumberingplan
ingplan <isdn|unknown|get>
Where:
• isdn: With this parameter, the
numbering plan is identified to the
upstream switch as ISDN, and the
number type, which is either national
or international, is determined from
the dialed phone number. If the
dialed phone number starts with the
international dialing prefix that is
currently selected, the type is set to
the international and the prefix is
removed from the number before the
number is sent to the upstream
switch. Otherwise, the number is
marked as national and passed to
the upstream switch without
modification.
• unknown: This is the default
selection. With this parameter, the
numbering plan and number type
are sent to the upstream as
unknown, and the dialed phone
number is sent without notification.
The "unknown" parameter is
preferred and should work with all
properly configured PBXs and with
most telephone company switches.
A notable exception in North
America is an ATT 5ESS switch,
which is provisioned with Accunet,
or an ATT 4ESS switch. For these
switches, set the numbering type to
ISDN.
• get: Returns the current setting.
prioutside- prioutsideline <set|get>
line ["outside_line"]
Where:
• set: Sets the outside-line-access
PRI number when followed by the
parameter "outside_line". To erase
the current setting, omit the
parameter.
• get: Returns the current setting.
• "outside_line": Numeric string.
This number is provided by your
network service provider.
© Polycom, Inc.
Description
Sets or gets the PRI numbering
plan.
User interface screen location:
System > Admin Settings >
Network > IDSN (page 3):
Numbering Plan
Note: This screen is only acces-
sible if you have a PRI network
interface connected to your
system.
Sets or gets the PRI number
that is dialed for outside line
access. This number is needed
if your system is on a PBX.
User interface screen location:
System > Admin Settings >
Network > ISDN: Outside Line
Dialing Prefix
Note: This screen is only acces-
sible if you have a PRI network
interface connected to a
VSX system.
Chapter 3 - System Commands
Example
prinumberingplan
isdn
prioutsideline
set 9
3 - 77