Polycom VSX Series Integrator's Reference Manual page 90

Integrator's Reference Manual for the VSX Series
Command Syntax
netstats netstats [{0..2}]
Where:
• 0..2: Calls in a multipoint call, where
0 is the first endpoint connected). If
no call is specified, netstats returns
information about the near site.
ping ping <ipaddress> ["count"]
Where:
• ipaddress: IP address of the
device.
• "count": Optional parameter
defining the number of times the
device is to be pinged. The default is
1.
3 - 50
Description
Returns network statistics for
each call.
User interface screen location:
System > Diagnostics > Call
Statistics (page 2)
Pings the IP address of a device
to check if it can be reached.
User interface screen location:
System > Diagnostics > Net-
work: Near End Loop
www.polycom.com/videodocumentation
Example
netstats 2
returns information
similar to this:
call:1
txrate:128k
rxrate:128k
pktloss:0
%pktloss:0.00%
tvp:H.263
rvp:H.263 tvf:CIF
rvp:CIF
tap:G.722.1
rap:G.722.1
tcp:H.323
rcp:H.323
where:
txratetransmit clock rate
rxratereceive clock rate
pktlossnumber of
packet loss/errors
%pktlosspercentage of
packet loss/errors
tvptransmit video
protocol
rvpreceive video
protocol
tvftransmit video format
rvfreceive video format
taptransmit audio
protocol
rapreceive audio
protocol
tcptransmit comm
protocol
rcpreceive comm
protocol
ping
192.168.100.2