Polycom VSX Series Integrator's Reference Manual page 87

Command Syntax
displayipisd- displayipisdninfo
ninfo <yes|no|both|ip-only|isdn-only|non
e|get>
Where:
• yes: Replies with both.
• no: Replies with none.
• both: Enables the display of both IP
and ISDN information.
• ip-only: Disables the display of IP
information.
• isdn-only: Enables the display of
ISDN information.
• none: Disables the display of IP and
ISDN information.
• get: Returns the current setting.
gener- generatetone <on|off>
atetone
Where:
• on: Turns on the test tone.
• off: Turns off the test tone.
getcallstate getcallstate
© Polycom, Inc.
Description
Displays IP and ISDN informa-
tion on the main user interface
.
screen
User interface screen location:
System > Admin Settings >
General Settings > Home
Screen Settings (page 2):
IP or ISDN Information
Turns the test tone on or off. The
tone is used to check the moni-
tor audio cable connections or to
monitor the volume level.
User interface screen location:
System > Diagnostics > Audio
> Speaker Test
Gets the state of current calls.
(To register the shell session to
receive notifications about call
state activities, see the
callstate command on
page 3-45.
User interface screen location:
System > Diagnostics > Call
Statistics
Chapter 3 - System Commands
Example
displayipisdninfo
yes
generatetone on
getcallstate
returns something like
cs: call[33]
speed[512]
dialstr[216.54.15
0.82]
state[connected]
cs: call[1]
inactive
cs: call[2]
inactive
3 - 47