Polycom VSX Series Integrator's Reference Manual page 133

Command Syntax
display-
params
(continued)
enablesnmp enablesnmp <yes|no|get>
Where:
• yes: Enables the SNMP option.
• no: Disables the SNMP option.
• get: Returns the current setting (yes
or no).
gabpass- gabpassword <set|get>
word ["password"]
Where:
• set: Sets the GDS password to
"password". To erase the current
setting, omit "password".
• "password": Password to access
the GDS server. Valid characters
are: a through z (lower and
uppercase), -, _, @, /, ;, ,, ., \, 0
through 9. Enclose the string in
quotation marks if it includes
spaces.
© Polycom, Inc.
Description
Enables or disables SNMP. This
option is enabled by default.
User interface screen location:
System > Admin Settings >
Global Services > SNMP:
Enable SNMP
Sends the password to gain
access to the Global Directory
Server (GDS) server.
Note: This command cannot be
used unless an admin password
has been set.
User interface screen location:
System > Admin Settings >
Global Services > Directory
Servers: Password
Chapter 3 - System Commands
Example
registerthissyste
m no
showaddrsingab
both
primarycallchoice
manual
secondarycallchoi
ce none
preferredalias
extension
gatewaynumbertype
number+extension
outboundcallroute
isdn
usegatekeeper off
numdigitsdid 7
numdigitsext 4
gatewaycountrycod
e <empty>
gatewayareacode
<empty>
gatewaynumber
<empty>
gatekeeperip
<empty>
h323name Jw
e164ext 59715
gatewayext 59715
usepathnavigator
required
................
enablesnmp yes
gabpassword set
gabPass
3 - 93