Polycom VSX Series Integrator's Reference Manual page 114

Integrator's Reference Manual for the VSX Series
Command Syntax
pricsu pricsu <internal|external|get>
Where:
• internal: Sets the internal CSU
mode. This is the default.
• external: Sets the external CSU
mode. When selected, you must
specify the PRI line buildout. (See
the prilinebuildout
page 3-75.)
• get: Returns the current CSU
setting (internal or external).
pridialchan- pridialchannels <set|get>
nels <{1..12|1..15}>
Where:
• set: Sets the number of PRI
channels to be dialed in parallel
when followed by a parameter from
<{1..12|1..15}>. To erase the current
setting, omit the parameter.
• get: Returns the current number of
channels dialed in parallel.
• {1..12|1..15}: Range of numbers of
PRI channels that can be dialed in
parallel. For PRI T1, the range is
1..12. For PRI E1, the range is 1..15.
priintlprefix priintlprefix <set|get> ["prefix"]
Where:
• set: Sets the PRI international
dialing prefix when followed by the
parameter "prefix". To erase the
current setting, omit the parameter.
• get: Returns the current setting.
• "prefix": Numeric string.
3 - 74
Description
Sets or gets the PRI CSU mode
for a T1 interface. By default, the
T1 PRI network interface
module is set for internal CSU
mode.
User interface screen location:
System > Admin Settings >
Network > IDSN (page 2):
command on
External CSU
Note: This screen is only acces-
sible if you have a PRI network
interface connected to your
system.
Sets or gets the number of PRI
channels to dial in parallel. By
default, ISDN channels are
dialed three at a time. On PRI
systems, you can choose the
number of channels to dial in
parallel.
User interface screen location:
System > Admin Settings >
Network > IDSN (page 4):
Number of Active Channels
Note: This screen is only acces-
sible if you have a PRI network
interface connected to your
system.
Sets or gets the PRI interna-
tional dialing prefix. The
international prefix defaults to
011 for North America and 00
for European countries. The
default depends on the country.
User interface screen location:
System > Admin Settings >
Network > IDSN (page 3):
International Dialing Prefix
Note: This screen is only acces-
sible if you have a PRI network
interface connected to your
system.
Example
pricsu external
pridialchannels
set 3
priintlprefix set
011
www.polycom.com/videodocumentation