Polycom VSX Series Integrator's Reference Manual page 58

Integrator's Reference Manual for the VSX Series
Command Syntax
mute mute <register|unregister|near|far>
mute near <on|off|toggle|get>
mute far get
Where:
• register: Registers the system to
give notification when the mute mode
changes.
• unregister: Disables register mode.
• near: Sets the command for the near
site. Requires one of these
parameters: on, off, toggle, or get.
• far: Sets the command for the far
site. Requires the parameter get.
For mute <near|far> parameter:
• on: Turns on the mute mode for the
near site (mute near).
• off: Turns off the mute mode for the
near site (mute near).
• toggle: If in mute near mode,
switches to the other mode setting
(mute near off) and vice versa.
• get: Returns the current setting for
the near or far site (mute near|far
get).
muteau- muteautoanswer <yes|no|get>
toanswer
Where:
• yes: Enables Mute Auto Answer
Calls mode. The microphone will be
muted when the VSX system
receives a call while in Auto Answer
mode.
• no: Disables Mute Auto Answer Calls
mode. The microphone will not be
muted when the VSX system
receives a call while in Auto Answer
mode.
• get: Returns the current setting (yes
or no).
soundef- soundeffectsvolume <set|get|test>
fectsvolume
soundeffectsvolume set <{0..10}>
Where:
• set: Sets the volume of sound
effects. Requires a volume
parameter in the range {0..10}.
• get: Returns the current setting.
• test: Tests the volume of sound
effects.
3 - 18
Description
Sets the near or far site mute
mode. Also sets the system to
register or unregister mode. In
register mode, the system sends
notification to the RS-232 ses-
sion when the far or near site is
muted or unmuted.
Sets the VSX system to Mute
Auto Answer Calls mode. When
this option is selected, the
microphone pod is turned off to
prevent the far site from hearing
the near site when the VSX
system is in Auto Answer mode.
User interface screen location:
System > User Settings: Mute
Auto Answer Calls
Allows you to adjust and test the
volume of the sounds made by
the VSX system when an object
on the screen is selected with
the remote control.
User interface screen location:
System > Admin Settings >
Audio: Sound Effects Volume
www.polycom.com/videodocumentation
Example
mute near on
muteautoanswer
yes
soundeffectsvolu
me set 6