Polycom VSX Series Integrator's Reference Manual page 88

Integrator's Reference Manual for the VSX Series
Command Syntax
lanstat lanstat
<min|misc|reset|sec|tmin|total>
lanstat min ["time"]
lanstat tmin ["time"]
Where:
• sec: Returns the accumulating total
of LAN statistics for the current
minute.
• min: Returns the last 0 to 60
minutes of LAN statistics. A "time"
parameter can be specified in the
range {0..60}. When "time" is not
specified, the last 10 minutes of
statistics are returned.
• tmin: Returns the last minutes of
LAN statistics totals.
A "time" parameter can be specified
in the range {0..60}. When "time" is
not specified, the last 10 minutes of
statistics are returned.
• "time": Time in minutes. Must be an
integer in the range {0..60.}
• total: Returns cumulative LAN
statistics.
• misc: Returns miscellaneous
LAN/VLAN statistics.
• reset: Resets cumulative LAN
statistics.
3 - 48
Description
Returns local area network
statistics.
www.polycom.com/videodocumentation
Example
Example 1
lanstat min 1
returns information
similar to this:
lanstat: LAN
statistics for
minute -1
lanstat: Port 0
Port 1
lanstat: rx_bytes
985 0
lanstat: tx_bytes
351 0
lanstat:
rx_packets 6 0
lanstat:
tx_packets 5 0
lanstat:
rx_errors 0 0
lanstat:
rx_unicasts 5 0
lanstat:
rx_polycasts 1 0
lanstat:
rx_polycasts_filt
ered 0 0
lanstat:
rx_resource_error
0 0
lanstat:
rx_collisions 0 0
lanstat:
rx_oversize_frame
0 0
lanstat:
rx_runt_errors 0 0
lanstat:
rx_crc_errs 0 0
lanstat:
rx_align_errs 0 0
lanstat:
rx_overruns 0 0
lanstat:
rx_no_buffer 0 0
lanstat:
rx_multiframe 0 0